Wondering if there is a secure ready made harness available to connect 2 Chassis's (Chassi?) for a power amplifier. One enclosure will house the Electronics and heatshink, the other, the PSU.
I need at least a 3 gang / cable connection (prefer 6) that can be plugged in (screw type preferable)
Is able to handle 20amps sustained, and higher peaks. I have looked at Mouser... but I get lost in the tens of thousands of skus they have...
Any pointers would be appreciated.
I need at least a 3 gang / cable connection (prefer 6) that can be plugged in (screw type preferable)
Is able to handle 20amps sustained, and higher peaks. I have looked at Mouser... but I get lost in the tens of thousands of skus they have...
Any pointers would be appreciated.
https://www.neutrik.com/en/neutrik/products/powercon/powercon-20-a
There is a newer 32A version also. Not Screw type, but lock type.
For the pre-amps You could use an aviation connector for example.
5pcs Aviation Plug 4-Pin 16mm GX16-4 Metal Male Female Panel Connector Silver | Wish
There is a newer 32A version also. Not Screw type, but lock type.
For the pre-amps You could use an aviation connector for example.
5pcs Aviation Plug 4-Pin 16mm GX16-4 Metal Male Female Panel Connector Silver | Wish
Thanks Maaco. With the neutrik, I am worried someone might try to plug in a speaker... since they use the same plug/ socket
No, Speaker plugs are Speakon and don't mate, but they could plug it into a powered speaker indeed. The 32A Powercon version is not very common, mostly I've seen is the blue version.
Or use something like this
heavy|mate(R) - Heavy Duty Rectangular Connectors
Or use something like this
heavy|mate(R) - Heavy Duty Rectangular Connectors
Last edited: