FS: CLEARANCE: Various PCBs - Headphone Amplifiers / D-Noizator / FREE UK P&P
I have a few spare PCB's for made from the original design files. These are spare boards which I have left over from a fabrication run (due to minimum order requirements) and are therefore sold for DIY purposes only and not for commercial gain. They are to cover board, build and shipping costs to me, not for profit. Once they are gone, they are gone.
PAYMENT AND SHIPPING:
Die-Noizator 5-36V PSU, PCB designed by me, schematic by Elvee/diegomj1973
D-Noizator: a magic active noise canceller to retrofit & upgrade any 317-based V.Reg.
Single rail positive PSU 5-36V.
Onboard transformer solution (Talema/Amveco/RS Pro toroidal series)
EMI filter, transformer snubber, CRC, LM317, Sziklai Pair Die-Noizator. Extremely low noise PSU.
220-240V primary. Secondaries can be jumpered parallel or series.
None available £6 each, 100g 'Letter'
Die-Noizator 5-36V, PCB designed by tombo56, schematic by Elvee/diegomj1973
D-Noizator: a magic active noise canceller to retrofit & upgrade any 317-based V.Reg.
Single rail positive PSU 5-36V
Offboard transformer.
None available £4 each, 100g 'Letter'
Objective 2 Headphone Amplifier designed by NwAvGuy
NwAvGuy: O2 Details
2x available £8 each, 100g 'Letter'
WHAMMY Class A Headphone Amplifier designed by Wayne Colburn (Pass Labs)
"WHAMMY" Pass DIY headphone amp guide
None available- £18 each, 200g 'Large Letter'
Note: This is based on Wayne's original design files from 2017 which do not have the optional input resistors (R39/R40). These are included in the latest revision to add some input impedance which makes the amplifier more stable using some older audio sources. However, they are optional and can be added between the input pads and the input RCA connector if required (see schematic). For the newest, supported PCB revision, please see diyaudiostore.com
Alps RK27 Blue Velvet Mounting Board
7x available £3 each, 100g 'Letter'
CheapModo Snubber Calculator designed by Mark Johnson
CheapoModo: quick and dirty transformer snubber bellringer jig
A quick and dirty transformer snubber bellringer jig
2x available £3 each, 100g 'Letter'
I have a few spare PCB's for made from the original design files. These are spare boards which I have left over from a fabrication run (due to minimum order requirements) and are therefore sold for DIY purposes only and not for commercial gain. They are to cover board, build and shipping costs to me, not for profit. Once they are gone, they are gone.
PAYMENT AND SHIPPING:
- Payment by Paypal "Friends and Family"
- UK - Free untracked P&P for orders over £5, additional fee for Signed-For.
- EU/US - As per Royal Mail: Get a price | Royal Mail Group Ltd
- Payment within 48 hours before being released from reserve
Die-Noizator 5-36V PSU, PCB designed by me, schematic by Elvee/diegomj1973
D-Noizator: a magic active noise canceller to retrofit & upgrade any 317-based V.Reg.
Single rail positive PSU 5-36V.
Onboard transformer solution (Talema/Amveco/RS Pro toroidal series)
EMI filter, transformer snubber, CRC, LM317, Sziklai Pair Die-Noizator. Extremely low noise PSU.
220-240V primary. Secondaries can be jumpered parallel or series.
None available £6 each, 100g 'Letter'
- 1x jean-paul (GER) Dispatched
- 1x giaspyr (GRE) Dispatched
- 2x ml48 (UK) Dispatched
Die-Noizator 5-36V, PCB designed by tombo56, schematic by Elvee/diegomj1973
D-Noizator: a magic active noise canceller to retrofit & upgrade any 317-based V.Reg.
Single rail positive PSU 5-36V
Offboard transformer.
None available £4 each, 100g 'Letter'
- 1x giaspyr (GRE) Dispatched
- 2x JRKO (UK) Dispatched
- 1x indaco (ITA) Dispatched
- 1x capslock (GER) Dispatched
Objective 2 Headphone Amplifier designed by NwAvGuy
NwAvGuy: O2 Details
2x available £8 each, 100g 'Letter'
- 1x capslock (GER) Dispatched
- 1x Gregje(UK) Dispatched
WHAMMY Class A Headphone Amplifier designed by Wayne Colburn (Pass Labs)
"WHAMMY" Pass DIY headphone amp guide
None available- £18 each, 200g 'Large Letter'
- 2x Itsmee (UK) Dispatched
- 1x capslock (GER) Dispatched
Note: This is based on Wayne's original design files from 2017 which do not have the optional input resistors (R39/R40). These are included in the latest revision to add some input impedance which makes the amplifier more stable using some older audio sources. However, they are optional and can be added between the input pads and the input RCA connector if required (see schematic). For the newest, supported PCB revision, please see diyaudiostore.com
Alps RK27 Blue Velvet Mounting Board
7x available £3 each, 100g 'Letter'
- 2x davidjt (UK) Dispatched
- 2x Itsmee (UK) Dispatched
- 2x Slinkymalinky (UK) Dispatched
- 1x indaco (ITA) Dispatched
- 2x capslock (GER) Dispatched
CheapModo Snubber Calculator designed by Mark Johnson
CheapoModo: quick and dirty transformer snubber bellringer jig
A quick and dirty transformer snubber bellringer jig
2x available £3 each, 100g 'Letter'
- 1x capslock (GER) Dispatched
- 1x Gregje(UK) Dispatched
Attachments
Last edited:
I would like to have one Die-Noizator pcb designed by you plus another designed by tombo56 shipped to Greece by Royal Mail International Standard please, send me a pm with total value and your paypal email please.
Cheers
Cheers
Thanks all.
Original Post updated with quantities and orders.
PMs sent.
I'll do another batch of my Die-Noizator boards soon if there is any more interest?
Original Post updated with quantities and orders.
PMs sent.
I'll do another batch of my Die-Noizator boards soon if there is any more interest?
Last edited:
Here are some resources for those who have requested my Die-Noizator LM317 board.
TRANSFORMER SECONDARY JUMPERS:
Series: Connect B+C
Parallel: Connect A+B, C+D
TRANSFORMER SECONDARY JUMPERS:
Series: Connect B+C
Parallel: Connect A+B, C+D
Attachments
Last edited:
Gee, that is very fast to Greece! 😀
As an update: My Die-Noizator boards went so fast... I have ordered another batch, but I have also added pads for the primaries to allow for 110V use.
Let me know if you'd like to reserve one, they'll be arriving in about a week. 8 boards will be available.
I'll also have 3x ACP+ Preamp/Headphone Amp boards and some fun helper boards.
Last edited: