I have built 9 of Rudi's upgraded torroidal Amp Camp Amps that feature TungstenAudio's part modifications and JasonKeutemann's CapMX Power Supply and these amps are fantastic!
I over ordered on the boards and have no use for this last pair and the spare parts I still have left to build another pair. You will receive:
- 2 of Rudi's PCB boards
- 4 10,000uf filter caps
- 2 1000uf Organic Polymer caps (Tungstenaudio Recommendation)
- 2 100uf Organic Polymer Caps (Tungstenaudio Recommendation)
- 2 10uf Panasonic caps
- 2 5K trimmer Pots
- 2 50k trimmer Pots
- 4 IRFP140 Mosfets
- 2 KBU8b Diode Brides
- 2 IRFP9240 regulators
- 4 2.2uf Wima Caps for Power Supply
- 2 Toshiba 2sk170 JFETS
- 2 4700uf 35V Nichicon Gold Caps (Tungstenaudio Recommendation)
- 4 PCB Mount Terminals
- 4 Spade Connectors
- 4 KSC 1845 for Power supply (need 2 more)
- 4 MPC71 Metal Film .47 Resistors (Fukushima 5 Watt)
- 4 MPC71 Metal Film .22 Resistors (Fukushima 5 Watt)
- 4 MPC71 Metal Film .56 Resistors (Fukushima 5 Watt)
- 2 Nichicon 1000uf Caps
- 1 Bridging switch for mono
- 1 XLR input for mono
- 1 IEC connector
- 1 Fuse Holder
- 4 blue leds
- 2 10pf Mica caps (Tungstenaudio Recommendation)
- 2 100n ceramic caps (for Power Supply)
All of these are parts that Rudi recommended I used in my amps with great results. You only need to buy the resistors and 2 more KSC1845. I recommend Vishay/Dale RN55 1/8 watt or Beyschlag .6Watt resistors to fit this board as the spacing is pretty tight. I successfully used some RN60/65 1/8 watt but they take up a bit more space. I can include all resistors I used in my builds for just $25 more.
As for Power Supply, I used the Antek AS 2022 and 2222 but would also recommend the 2422 as these amps benefit from good power supply and higher voltage secondaries.
Asking me any questions about my builds. Pictures of my example builds are listed using 5in.Hx9in. Lx3in.W (fin size). I have heard the mini dissipante 3u works great.
Asking $150 SHIPPED in the CONUS ONLY please. $175 and I will include all the resistors you need.
I over ordered on the boards and have no use for this last pair and the spare parts I still have left to build another pair. You will receive:
- 2 of Rudi's PCB boards
- 4 10,000uf filter caps
- 2 1000uf Organic Polymer caps (Tungstenaudio Recommendation)
- 2 100uf Organic Polymer Caps (Tungstenaudio Recommendation)
- 2 10uf Panasonic caps
- 2 5K trimmer Pots
- 2 50k trimmer Pots
- 4 IRFP140 Mosfets
- 2 KBU8b Diode Brides
- 2 IRFP9240 regulators
- 4 2.2uf Wima Caps for Power Supply
- 2 Toshiba 2sk170 JFETS
- 2 4700uf 35V Nichicon Gold Caps (Tungstenaudio Recommendation)
- 4 PCB Mount Terminals
- 4 Spade Connectors
- 4 KSC 1845 for Power supply (need 2 more)
- 4 MPC71 Metal Film .47 Resistors (Fukushima 5 Watt)
- 4 MPC71 Metal Film .22 Resistors (Fukushima 5 Watt)
- 4 MPC71 Metal Film .56 Resistors (Fukushima 5 Watt)
- 2 Nichicon 1000uf Caps
- 1 Bridging switch for mono
- 1 XLR input for mono
- 1 IEC connector
- 1 Fuse Holder
- 4 blue leds
- 2 10pf Mica caps (Tungstenaudio Recommendation)
- 2 100n ceramic caps (for Power Supply)
All of these are parts that Rudi recommended I used in my amps with great results. You only need to buy the resistors and 2 more KSC1845. I recommend Vishay/Dale RN55 1/8 watt or Beyschlag .6Watt resistors to fit this board as the spacing is pretty tight. I successfully used some RN60/65 1/8 watt but they take up a bit more space. I can include all resistors I used in my builds for just $25 more.
As for Power Supply, I used the Antek AS 2022 and 2222 but would also recommend the 2422 as these amps benefit from good power supply and higher voltage secondaries.
Asking me any questions about my builds. Pictures of my example builds are listed using 5in.Hx9in. Lx3in.W (fin size). I have heard the mini dissipante 3u works great.
Asking $150 SHIPPED in the CONUS ONLY please. $175 and I will include all the resistors you need.
