is real anintresting woofer, which one of you tested and used it ?
😉
i'm realy excited to heve info on it.
maybe fine if there is a diy measurement of it.
😉
i'm realy excited to heve info on it.
maybe fine if there is a diy measurement of it.
Distortions @20Hz. At least one person who wanted to buy a pair was frightened by this picture 😀 .
I wasn't able to find measurements in the places I usually look, but HiFiCompass might be willing to get one and measure it if you ask. He already did the SB42FHC75-6.
I am looking at this driver for a very large domestic system.
I am thinking of using a pair of them mounted horizontally opposed in force cancellation loaded in a sealed box of 400 litres, this will give a nice low system Q of approx 0.62
Drive will be active and will cross over at 250Hz to the midrange drivers.
I am thinking of using a pair of them mounted horizontally opposed in force cancellation loaded in a sealed box of 400 litres, this will give a nice low system Q of approx 0.62
Drive will be active and will cross over at 250Hz to the midrange drivers.
has anyone used this woofer yet? Looks good in closed box to 35hz, almost true acoustic suspension.
Not yet the project I cites in my earlier post was abandoned, but now considering a Big Duntech or Dunlavy sized beat using two of them per side, may be a tough load for smaller amps though.
This is actually a great woofer, despite it is sold as a subwoofer. It is one of the few 15" hifi woofers left, with low Fs. I has good resolution, and goes really deep. I have made the crossover on a friends project, using this woofer and textreme drivers for mid and tweeter. Link for our local Danish forum : http://www.forum.speakerbuilder.dk/forum_posts.asp?TID=2103&PN=3&title=2021-projekt
