Finally, I´m starting GB for printed circuit board for following products:
- PASS F6 PSU - DIY-NR002
10 boards: 176x168x2mm; HAL; 70µm; SILK TOP/BOT; GRN/WHITE
(ordered: @2 PicoDumbs)
- PASS M2 - DIY-NR003
20 boards: 110x120x2mm; HAL; 70µm; SILK TOP; GRN/WHITE
(ordered 1 pair: @MASantos, @wrath; @brianco;@kweeSong lim; @Cambe; @mk57; @vvs57)
- PASS F6 NITROUS - DIY-NR004
20 boards: 110x103x2mm; HAL; 70µm; SILK TOP; GRN/WHITE
(ordered 1pair: @2 PicoDumbs)
- PASS ACA - DIY-NR005
10 boards: 100x80,5x2mm; HAL; 70µm; SILK TOP; GRN/WHITE
- XRK-BF862 HPA (with charger) - DIY-NR006
10 boards: 102x72x1.6mm; ENIG; 35µm; GRN/WHITE
Actually price without postage for this quantities from 14€ and 30€ for F6 SUPPLY.
Following product finished this weekend:
- SUDSEPP - DIY-NR007
Following products before end of next week:
- ZM IRON-PRE (both versions and batteries supply) - DIY-NR008
- JUMA-BF862-PREAMP+CUBIE3 (one big board with LDR volume control) - DIY-NR009
In the line:
- all BOM´s
Would be nice to close first GB end of next week.
JP
- PASS F6 PSU - DIY-NR002
10 boards: 176x168x2mm; HAL; 70µm; SILK TOP/BOT; GRN/WHITE
(ordered: @2 PicoDumbs)
- PASS M2 - DIY-NR003
20 boards: 110x120x2mm; HAL; 70µm; SILK TOP; GRN/WHITE
(ordered 1 pair: @MASantos, @wrath; @brianco;@kweeSong lim; @Cambe; @mk57; @vvs57)
- PASS F6 NITROUS - DIY-NR004
20 boards: 110x103x2mm; HAL; 70µm; SILK TOP; GRN/WHITE
(ordered 1pair: @2 PicoDumbs)
- PASS ACA - DIY-NR005
10 boards: 100x80,5x2mm; HAL; 70µm; SILK TOP; GRN/WHITE
- XRK-BF862 HPA (with charger) - DIY-NR006
10 boards: 102x72x1.6mm; ENIG; 35µm; GRN/WHITE
Actually price without postage for this quantities from 14€ and 30€ for F6 SUPPLY.
Following product finished this weekend:
- SUDSEPP - DIY-NR007
Following products before end of next week:
- ZM IRON-PRE (both versions and batteries supply) - DIY-NR008
- JUMA-BF862-PREAMP+CUBIE3 (one big board with LDR volume control) - DIY-NR009
In the line:
- all BOM´s
Would be nice to close first GB end of next week.
JP
Does anybody knows what are the postage costs for international UPS standard shipping from Germany?
I´ll order 30 boards for each project, so I´ll offer:
- DIY-NR002 for 18EUR
- DIY-NR003 for 15EUR
- DIY-NR004 for 14EUR
- DIY-NR005 for 12EUR
- DIY-NR006 for 10EUR
- DIY-NR007 for 9EUR
- without postage costs
Finishing JUMA CUBIE3 power supply.
JP
I´ll order 30 boards for each project, so I´ll offer:
- DIY-NR002 for 18EUR
- DIY-NR003 for 15EUR
- DIY-NR004 for 14EUR
- DIY-NR005 for 12EUR
- DIY-NR006 for 10EUR
- DIY-NR007 for 9EUR
- without postage costs
Finishing JUMA CUBIE3 power supply.
JP
ups will probably be very expensive and German postal services might offer a cheaper and also reliable option.
can you please confirm the mountain hole distances for the m2 and power supply boards?
can you please confirm the mountain hole distances for the m2 and power supply boards?
Last edited:
M2 amp is UMS mounting compatible, from PCB origin:
- 15; 40
- 15; 80
- 95; 40
- 95; 80
F6 supply, the holes are, from PCB origin:
- 4; 4
- 4; 164
- 91; 4
- 91; 164
- 172; 4
- 172; 164
JP
- 15; 40
- 15; 80
- 95; 40
- 95; 80
F6 supply, the holes are, from PCB origin:
- 4; 4
- 4; 164
- 91; 4
- 91; 164
- 172; 4
- 172; 164
JP
Please remove my name (shown in red) I thought for some reason that this was a M2 POWER SUPPLY board. Apologies.
Done very little due to medical problems! Low BP = fainting! Reduced my beta blockers so now better - at last. But salmon fishing takes precedence over everything else!
If you want to keep prices down China PCB Prototype & Fabrication Manufacturer - PCB Prototype the Easy Way is very cheap.
Especially if the pcb's are less than 10cm by 10cm.
They are also very quick and good quality.
Especially if the pcb's are less than 10cm by 10cm.
They are also very quick and good quality.
Hallo JP,
I am interested in the M2 boards (DIY-NR003).
Is the price quoted (EUR 15) per board or per pair of boards ?
Best regards,
Claas
I am interested in the M2 boards (DIY-NR003).
Is the price quoted (EUR 15) per board or per pair of boards ?
Best regards,
Claas
Nice stuff, but once you catch your breath, how about a nice cap multiplier suitable for these amps?