PCB for Peak Voltage and Current detector

[gdan]

I have a few PCBs (shown in Photo) for the construction of a Peak Voltage and Current detector (shown in the other photo) as was presented in my article for Audioxpress (March 2015).
The device can be easily inserted between the amplifier and the loudspeaker and will measure the peak voltage and the peak current during the reproduction of a real music signal.
The price for the PCB is 25 Euros plus shipping.
Due to copyright, it is not possible to upload the article, but if you have read the article and interested, send me an e-mail at gntanavaras@gmail.com

 

[gdan]

A kind reminder for the PCB of the Peak Voltage and Current detector.

If you are interested, send me an e-mail at gntanavaras@gmail.com

 

[gdan]

Another reminder.

 

[gdan]

Joao Martins, Editor-in-chief of Audioxpress magazine was very kind to post the article on line. You can find it here:
You Can DIY! Build a Voltage and Current Peak Detector | audioXpress
I have a few PCBs (shown in Photo of post#1) for the construction of a Peak Voltage and Current detector.
The price for the PCB is 25 Euros plus shipping.
if you are interested, send me an e-mail at:
gntanavaras@gmail.com

 

[gdan]

For those that have built the Peak detector, I suggested a modification to the original article here:
You Can DIY! Build a Voltage and Current Peak Detector | audioXpress

 

[gdan]

I have a new small batch of PCBs for the construction of the Peak detector.

The price now for each PCB is 15 euros plus shipping.

If you are interested send me an email at:
gntanavaras@gmail.com

 

[gdan]

I decided to clear my stock of these PCBs.
The price now for each PCB is 10 euros plus shipping.
If you are interested send me an private message.

Yoy can read the construction article here :
You Can DIY! Build a Voltage and Current Peak Detector | audioXpress

 

[gdan]

Some PCBs are still available, if someone is interested for the construction of the Peak Voltage and Current detector.

 

[gdan]

I still have some PCBs.

Anyone interested ?

 

[gdan]

I still have some PCBs left in my stock.

The price for each PCB is 10 euros plus shipping.

You can find more information for the construction of the Peak Voltage and Current detector here:
You Can DIY! Build a Voltage and Current Peak Detector | audioXpress

 

[gdan]

Reminder !

 

[head_unit]

Now three years later, do you still have any? Someone suggested I should build this...

 

[gdan]

It was me making the suggestion!

Yes I have some PCBs if you want to build it!