I have available a very small quantity of PCBs for building the headphone amplifier as described in my article in Audioxpress June 2013.
You can find the article online if you have missed it :
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
If you are interested, send me an email at: gntanavaras@gmail.com
You can find the article online if you have missed it :
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
If you are interested, send me an email at: gntanavaras@gmail.com
Attachments
A few PCbs are still available.
If you are interested, send me an email at: gntanavaras@gmail.com
You can find the article online if you have missed it :
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
If you are interested, send me an email at: gntanavaras@gmail.com
You can find the article online if you have missed it :
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
Each PCB contains the components for the raw Power supply, the regulated Power supply, the protection circuit and one headphone amplifier.
So if you want to build a two channel headphone amplifier you will need 2 PCBs.
So if you want to build a two channel headphone amplifier you will need 2 PCBs.
Hello,
Are these still awailable?
I have problem finding the relay in the article bom, could this be used?
G6A-274P-ST40-US-DC9
G6A-274P-ST40-US-DC9 Omron Electronics | Mouser
Thank`s
Gisle
Are these still awailable?
I have problem finding the relay in the article bom, could this be used?
G6A-274P-ST40-US-DC9
G6A-274P-ST40-US-DC9 Omron Electronics | Mouser
Thank`s
Gisle
I have some DS2E-M-DC9V relays available. If you are interested send me a email at:
gntanavaras@gmail.com
Of course you can use any other relay if the dimensions and the layout are the same with the above relay. But you should recalculate the resistors R29, R35 and R36 so that the voltage on the relay is close to its nominal value. Otherwise you could overdrive the relay and it will get really very hot. You should check also that the temperature on the body of the resistors is normal.
gntanavaras@gmail.com
Of course you can use any other relay if the dimensions and the layout are the same with the above relay. But you should recalculate the resistors R29, R35 and R36 so that the voltage on the relay is close to its nominal value. Otherwise you could overdrive the relay and it will get really very hot. You should check also that the temperature on the body of the resistors is normal.
I don't have any PCBs at the moment.
But I am thinking to re-order a small quantity if I could gather a few more requests.
But this will take some time, and I don't know if you could wait.
If you, or someone else, is interested, please send me an email at gntanavaras@gmail.com
But I am thinking to re-order a small quantity if I could gather a few more requests.
But this will take some time, and I don't know if you could wait.
If you, or someone else, is interested, please send me an email at gntanavaras@gmail.com
Hi George,
I sent an email another day from oleg.aradan
I am not in a rush at all and can wait. Have some other projects to work on in the meanwhile.
How many pcb requests do you need to justify production ?
I sent an email another day from oleg.aradan
I am not in a rush at all and can wait. Have some other projects to work on in the meanwhile.
How many pcb requests do you need to justify production ?
I 'm going to order a new small quantity of PCBs for my Headphone amplifier.
You can find the article online if you have missed it :
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
The cost will be 25 Euros per board plus shipping.
Two boards are needed for a stereo amplifier.
If you are interested, send me an email at: gntanavaras@gmail.com
You can find the article online if you have missed it :
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
The cost will be 25 Euros per board plus shipping.
Two boards are needed for a stereo amplifier.
If you are interested, send me an email at: gntanavaras@gmail.com
I have received the new batch of PCBs for the headphone amplifier.
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier.
If you are interested, send me an email at: gntanavaras@gmail.com
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier.
If you are interested, send me an email at: gntanavaras@gmail.com
Nice Boards!
George,
Just received a set of boards today. It may be a few weeks before I get them built, I am finishing up one project now, and have another in the queue.
They are well made, as good as any I have seen. Lots of wide tracks. The smallest trace I saw looked to be about .020" or .025". Nice.
I especially like the use of two ground planes, on both top and bottom: one or signal and one for power. No doubt keeping them separate keeps noise down, and I think it is an indicator of good layout, and good layouts are essential for good sound.
There are many good designs out there, and I like building them and listening to them all. Each has a unique character, a unique sound, something that it does exceptionally well. I am looking forward to listening to yours.
Best regards,
Mike
George,
Just received a set of boards today. It may be a few weeks before I get them built, I am finishing up one project now, and have another in the queue.
They are well made, as good as any I have seen. Lots of wide tracks. The smallest trace I saw looked to be about .020" or .025". Nice.
I especially like the use of two ground planes, on both top and bottom: one or signal and one for power. No doubt keeping them separate keeps noise down, and I think it is an indicator of good layout, and good layouts are essential for good sound.
There are many good designs out there, and I like building them and listening to them all. Each has a unique character, a unique sound, something that it does exceptionally well. I am looking forward to listening to yours.
Best regards,
Mike
I still have a few PCBs for the headphone amplifier.
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier.
If you are interested, send me an email at: gntanavaras@gmail.com
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier.
If you are interested, send me an email at: gntanavaras@gmail.com
I have available few remaining PCBs for building the headphone amplifier as described in my article in Audioxpress June 2013. You can download the article here:
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier plus a shipping cost of about 15 Euros.
If you are interested, send me an email at: gntanavaras@gmail.com
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier plus a shipping cost of about 15 Euros.
If you are interested, send me an email at: gntanavaras@gmail.com
I have available PCBs for building the headphone amplifier as described in my article in Audioxpress June 2013:
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier plus a shipping cost of about 15 Euros.
If you are interested, send me an email at: gntanavaras@gmail.com
Build A High-Quality, High-Power Headphone Amplifier | audioXpress
The cost is 50 Euros for the 2 boards that are needed for a stereo amplifier plus a shipping cost of about 15 Euros.
If you are interested, send me an email at: gntanavaras@gmail.com