Elektor Titan 2000

[jamesfeline]

hello every one

Has any body constructed the elektor titan 2000 power amplifier ? is so how did it sound ? any troubles with construction ? if any one has any finiched photos please lets have a look

regards

Nick

 

[consort_ee_um]

It may be the same as this:
http://www.corradodriver.de/HTML/Elektronik/Gigant2000/Gigant1.htm
Website is in German but you could use Babelfish to translate

 

[jacco vermeulen]

any troubles with construction ?

Apparently, i bought the remains of a titanitis twice.
A foolish amp project then, even more foolish to do now.
Easier ways to obtain a 300 watt amp.

 

[stoN_Cold]

HI!

J.V. is 100% right . Forget this amp.
My opinion is , for beginners the best way is try to make PA300 or PA600.
Very simple amp. & very cheap.
Ofcourse this is My opinion.

Regards zeoN_rider

 

[taj]

It may be the same as this:
http://www.corradodriver.de/HTML/Elektronik/Gigant2000/Gigant1.htm
Website is in German but you could use Babelfish to translate

That's certainly a complicated amp design. What are the FETs used for in the input section?

(And the MJE350 transistors are incorrectly labeled as MJE340 on the schematic.)

..tj

 

[Nikos]

I have construct this amp many years ago ....very very very power full amp.

 

[thebet]

Hi Nikos,
how did you manage to make this amplifier to work?

I have also constructed a prototype, following strictly the instructions (except i used other FETs) but it doesn't work. Looks like there is no continuity at the circuit.
I would appreciate any tips.
Thx,
Theodore