pico is pico
hope he's just plain grumpy these days
much better than any other possible option (having actual reason for grumpiness )
hope he's just plain grumpy these days
much better than any other possible option (having actual reason for grumpiness )
Pico, I don't think you are grumpy, any update from Gianluca that you know of, as to final pricing, freight, ordering details and manufacturing schedule. As far as I remember, January next year will be when it will be added to their order page.
No further update.
He is probably thinking about how much food he is gonna eat on Christmas day.
Haven't seen my fiancee in 12 months because of bloody coronavirus.
That's just the tip of the iceberg.
Hopefully have this sh1t soughted out soon.
This beauty says hi! 😀
Jokes aside, we are going to start the ordering process as soon as we open again after our Christmas closing. I'll have a talk with Pico during the next days to iron out some details regarding the customizations
Estimated Production Time should be around 3 business weeks. Everybody is welcome to place their order on our website as soon as the final product is online and purchaseable
Feel free to ask other questions in this thread so everybody can take advantage of that 🙂
Hi pico, I am not sure if you have posted this information, so can I ask if the 500mm depth is an internal or external dimension?
Also I believe the heat sinks on each side will be made up of 2 heat sinks - is that correct?
For the UMS heat sink drilling pattern for the overall side length (500mm), have you got a dimensioned drawing for that? Specifically showing the transistor mounting holes along the entire heat sink length.
I am just looking at my options for the Stasis ZM designed O/S pcb's.
Thanks again for your effort in all of this.
Also I believe the heat sinks on each side will be made up of 2 heat sinks - is that correct?
For the UMS heat sink drilling pattern for the overall side length (500mm), have you got a dimensioned drawing for that? Specifically showing the transistor mounting holes along the entire heat sink length.
I am just looking at my options for the Stasis ZM designed O/S pcb's.
Thanks again for your effort in all of this.
The heatsinks are 500 mm (2 x 250mm) so yeah it's 500 mm internal.
The front plate is 10mm
The rear plate is 3mm
External will be less than 515 mm
The front plate is 10mm
The rear plate is 3mm
External will be less than 515 mm
Last edited:
Heatsink hole pattern
Same dimensions as UMS but with additional holes to build a Pass Labs XA30.8 Clone.
It also corrects the blunder on the F6 PCB as well to mount mosfets symmetrically on a split heatsink
Same dimensions as UMS but with additional holes to build a Pass Labs XA30.8 Clone.
It also corrects the blunder on the F6 PCB as well to mount mosfets symmetrically on a split heatsink
Last edited:
Thanks for the replies pico, all clear.
One other question, you have shown 5 output transistor pairs per heat sink - is their any chance to add another 2 tapped holes so that we can have 6 pairs per heat sink - that is 12 pairs per side. There is space as shown for another pair on each heat sink.
One other question, you have shown 5 output transistor pairs per heat sink - is their any chance to add another 2 tapped holes so that we can have 6 pairs per heat sink - that is 12 pairs per side. There is space as shown for another pair on each heat sink.
Ok I can add an additional mosfet hole for 24 total mosfets per channel (12 output pairs per 500mm heatsink)
May as well
At the moment we have 10 pairs (20 total) per channel (per 500mm heatsink), same as XA30.8
May as well
At the moment we have 10 pairs (20 total) per channel (per 500mm heatsink), same as XA30.8
Last edited: