• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Aegis DIY Tube Headphone Amplifier

Jump to Latest
TONKERS

TONKERS

Member
Joined 2024
L0rdGwyn said:
Hello,

I am releasing a DIY tube amplifier project, the first complete DIY project I've released on this forum. The amplifier is called Aegis.

I started my DIY journey on the headphone forum Head-Fi. I have something of a tube DIY blog there where I catalog all of my ongoing projects. For a short period of time, I was building and selling my designs as a hobby business, but quickly realized I didn't have the time for it working a full time job. I thought I'd work on a DIY amplifier that forum members could build for themselves without my involvement. I've been working on it for the past year or so.

This is a headphone enthusiast's tube amplifier. I say that as I'm sure some will balk at the cost of parts, which is roughly $2,000 USD. Given what some people are willing to pay for commercial tube headphone amplifiers, which are creeping toward five figure prices, it's relatively affordable. I tried to come up with a design that 1) is easy to build, even for a novice DIYer, 2) uses easy to acquire vacuum tubes, 3) is simple and robust with low likelihood of parts failure and easy to troubleshoot, 4) uses a circuit that is not readily available on the commercial market, and 5) sounds good! I do not typically build budget-oriented designs for myself, and I did not do so here. I like to build amplifiers that look like professionally made products. Please abstain from telling me that it is too expensive, a waste of money, etc. You do not have to build it.

I've included download links to the BOM, chassis CAD files, and an exhaustive project document that includes an explanation of the circuit, schematics, recommended equipment, information on acquiring parts, step-by-step instructions with photos, testing procedures, and some basic measurements. Please note the instructions are written for a new DIYer, not one with experience, so they are very detailed. The gerber files to order the PCBs are attached to this post.

Measurements are in the last section of the build document.

You can find some subjective impressions of the amplifier here:

https://www.head-fi.org/threads/aegis-diy-tube-headphone-amplifier.965530/post-17224730
https://www.head-fi.org/threads/zmf-caldera-new-planar-magnetic-from-zmf.964836/post-17553801

Please let me know if you come across any typos or anything seems out of place and I will try to address it.

Link to build document PDF: https://drive.google.com/file/d/1C2NSRh8DkC1Blr2GMVC_83XAdM0IUFZA/view?usp=sharing
Link to the Excel BOM: https://docs.google.com/spreadsheet...ouid=113213015624875847507&rtpof=true&sd=true
Link to zipped chassis CAD files: https://drive.google.com/file/d/1GXCq11-S97FtTey2lVpv6CgkBul4Uryb/view?usp=sharing

View attachment 1175520 View attachment 1175523 View attachment 1175525
Click to expand...
do you perhaps know how thick they need to be? is it 0.5mm or like 1.6mm?
 
tommy_tc

tommy_tc

Member
Joined 2024
Hi, If you already seen this over at head-fi, please ignore.

I am trying to create a substitute for the elma switch. My goal is to make something that is easy to build, easy to source and also enables the 600 ohm output from the lundahl transformers. This relay network is what i come up with:
schematic.jpg

layout.jpg


  • it takes 4 relays to mimic the functionality of the elma switch and 6 to bring out the 600 ohm connection.
  • I use a voltage divider on B+ to steal 1 watt @5V to power the relays.
  • At rest, it is configured for 32ohm output.
  • Connecting SCOM to S1 will switch the output to 150ohm
  • Connecting SCOM to S2 will switch the output to 600ohm
  • Using a triple throw switch (rotary or toggle) can provide easy switching between all 3 output states.
  • I am using this switch for output switching
  • I use Omron G6K-2P-Y-DC5 in the design, unit price $4.38USD. This is the relay Woo audio use in the WA23 LUNA for input and output switching.
  • The BOM comes to about $40USD and all the parts are readily available everywhere. Well… its just a few resistors, 2 diodes and 6 relays
  • The pcb is 71x46mm

Please give the schematic a look, i don’t have anybody to help me review it before sending to JLCPCB.
Prototype board will arrive next week. If there is interest, i will post the gerber file here once i have verify the design.
 
  • Like
Reactions: 1 user
You must log in or register to reply here.
Top Bottom