At the moment I do not have an accurate scale ( only my wifes dusty Wii
) so I am only estimating but I believe they are under 10kg. which would cost 29.36 euro. If they are over 10kg. it costs 49.36
If you are still interested let me know and I will pick up a scale. (I need one anyway but it has been forbidden by my wife for fear it will tell her how much she actually weighs!)
It seems ignorance is not only bliss but also good for the self esteem
) so I am only estimating but I believe they are under 10kg. which would cost 29.36 euro. If they are over 10kg. it costs 49.36If you are still interested let me know and I will pick up a scale. (I need one anyway but it has been forbidden by my wife for fear it will tell her how much she actually weighs!)
It seems ignorance is not only bliss but also good for the self esteem
FS: Fostex FE203En-S Fullrange 8" pair NIB
FS: This is a new-in-box pair of limited edition Fostex FE203En-S 8" fullrange speakers. These have never been used. They were purchased new from Madisound when they were available.
600 dollars plus shipping.
Paypal as a "gift" or bank transfer.
Pickup is also ok, these are HEAVY. I am near Vienna, Austria.
FS: This is a new-in-box pair of limited edition Fostex FE203En-S 8" fullrange speakers. These have never been used. They were purchased new from Madisound when they were available.
600 dollars plus shipping.
Paypal as a "gift" or bank transfer.
Pickup is also ok, these are HEAVY. I am near Vienna, Austria.
Attachments
Last edited:
FS: VTA70 driver board for ST-70 assembled W/ tubes
FS: this is a driver board upgrade for the ST-70. The VTA70 from tubes4hifi.com
Includes everything you need aside from the 4 bias trimpots. I have the board mostly assembled except for the tube sockets, feedback resistors, and some caps, but they will be included. Sprague orange drops, G.E. film caps used.
All the resistors are hand-matched ( I am a bit obsessive!) Also included are 3 G.E. 12AT7 tubes which test strong on my B&K707. This board could be used to build an amp other than the st70 as well, choose your own chassis ect.
So, you get:
1 VTA70 driver board mostly stuffed
3 General Electric 12AT7 tubes
3 american made tube sockets
all extra parts needed EXCEPT the 4 bias trimpots
original instruction manual
Scan of the board for a template to punch the socket holes ( I had intended to mount the board from underneath my chassis for a clean look)
60 euros FREE SHIPPING IN E.U.
FS: this is a driver board upgrade for the ST-70. The VTA70 from tubes4hifi.com
Includes everything you need aside from the 4 bias trimpots. I have the board mostly assembled except for the tube sockets, feedback resistors, and some caps, but they will be included. Sprague orange drops, G.E. film caps used.
All the resistors are hand-matched ( I am a bit obsessive!) Also included are 3 G.E. 12AT7 tubes which test strong on my B&K707. This board could be used to build an amp other than the st70 as well, choose your own chassis ect.
So, you get:
1 VTA70 driver board mostly stuffed
3 General Electric 12AT7 tubes
3 american made tube sockets
all extra parts needed EXCEPT the 4 bias trimpots
original instruction manual
Scan of the board for a template to punch the socket holes ( I had intended to mount the board from underneath my chassis for a clean look)
60 euros FREE SHIPPING IN E.U.
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.