Lux 6056N Interstage Transformer

[korneluk]

Folks,
I need help sourcing pinout and specs for the Lux 6056N interstage transformer.
The 6057X is used the design below, but I'd like to find out the primary:secondary ratios and freq response specs for this unit.

71A PP AMP

Thx,

 

[Wavebourn]

It is obvious from pictures.

The ratio is 1:1.5+1.5, frequency response is at least from 20 Hz, limited by both transformers on top end 40 KHz.

 

[korneluk]

It is obvious from pictures.

The ratio is 1:1.5+1.5, frequency response is at least from 20 Hz, limited by both transformers on top end 40 KHz.

I may have not been clear is my request: I need specs for the 6056N. The sample schematic is for the 6057x.

Thx,

 

[nottrees2]

Did you ever get any info on your LUX 6056N?

I too have one of these and can find no information about it. Were you ever successful in your search?

Thanks!
Forrest

 

[jazbo8]

Please see the following scan from LUX's 1970 catalog:

 

[nottrees2]

Lux 6056N Transformer

Thank You Mr. Jazbo8 for the information !!
I have one other question that you or maybe the group could answer. Is there a prefered circuit that would best suit this transformer (10k CT : 40k CT) ?
Thanks To All !

 

[jazbo8]

You can use it if less gain is required such as the circuit shown in the above linked design, i.e., same topology with another tube.