Folks,
I need help sourcing pinout and specs for the Lux 6056N interstage transformer.
The 6057X is used the design below, but I'd like to find out the primary:secondary ratios and freq response specs for this unit.
71A PP AMP
Thx,
I need help sourcing pinout and specs for the Lux 6056N interstage transformer.
The 6057X is used the design below, but I'd like to find out the primary:secondary ratios and freq response specs for this unit.
71A PP AMP
Thx,
It is obvious from pictures.
The ratio is 1:1.5+1.5, frequency response is at least from 20 Hz, limited by both transformers on top end 40 KHz.
I may have not been clear is my request: I need specs for the 6056N. The sample schematic is for the 6057x.
Thx,
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Lux 6056N Interstage Transformer