Post your Solid State pics here. - Page 166 - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd December 2010, 09:01 AM   #1651
diyAudio Member
 
Join Date: Mar 2001
Location: Sydney
The cases were from the Italian company modushop.biz (HIFI2000). I provided the front panel cutouts/chamfer dimensions etc and they milled/machined them (for the preamp). I drilled the front panel for the amp. The rear panels I got from Front Panel Express.
Great service from both companies.

Others have asked about the switches -they were very expensive but I wanted a very professional finish:
I bought them from RS Components, but you may be able to get them cheaper elsewhere. The first part number shown below is RS Components part number.

The power (momentary) switch is an SAIA Burgess:
417-8618 Switch,pushbutton,momentary,IP67,TH9,black (SAIA-Burgess # 920000051)

The control switches are Schurter piezo switches:
456-1852 Switch,pushbutton,piezo,M16,aluminium,black (Schurter # 1241.2411.7)
  Reply With Quote
Old 11th December 2010, 06:35 PM   #1652
diyAudio Member
 
destroyer X's Avatar
 
Join Date: Feb 2004
Location: Recife - Brasil Northeast
Default Dx Blame ST - Brazilian boards (former ones)

Now we have blue boards that have just arrived to the Supercharged.

regards,

Carlos
Attached Images
File Type: jpg DSC02116sssx.jpg (931.2 KB, 1713 views)
File Type: jpg DSC02120aaa.jpg (657.4 KB, 1505 views)
__________________
Instantaneous pcboard copper corrosion; https://www.youtube.com/watch?v=WED3Bvmxepk
  Reply With Quote
Old 11th December 2010, 07:16 PM   #1653
diyAudio Member
 
Join Date: Aug 2003
Location: Prague,Czech Republic
Carlos,

isn't good to make output coil around this type of resistor...iron front end of resistor will cause rising of distortion, which is bigger than distortion of amp...
Cheers,
Pavel
  Reply With Quote
Old 11th December 2010, 07:24 PM   #1654
diyAudio Member
 
destroyer X's Avatar
 
Join Date: Feb 2004
Location: Recife - Brasil Northeast
Default It is this way to produce a picture for advertising purposes dear Epupa

The resistance is 0,47....the filter is not working as i do not use these filters...these boars are for my own personal use...family amplifiers having 1 meter audio cable only....filter is not active...parts are there to be filling component's holes only....and you know i use to do this way.

We had this same conversation in 2005....my memory is still very good.

To my builders, it is sugested, naturally, huge air core inductors,

The picture is for advertising only....alike a model only....do not work...you see, theres no audio entering and no supply

Ahahahaha!
Attached Images
File Type: jpg Real thing uses coils.jpg (319.5 KB, 1426 views)
__________________
Instantaneous pcboard copper corrosion; https://www.youtube.com/watch?v=WED3Bvmxepk

Last edited by destroyer X; 11th December 2010 at 07:28 PM.
  Reply With Quote
Old 11th December 2010, 07:30 PM   #1655
diyAudio Member
 
Join Date: Aug 2003
Location: Prague,Czech Republic
My brain also, Carlos...
  Reply With Quote
Old 13th December 2010, 08:16 PM   #1656
diyAudio Member
 
Join Date: Mar 2010
Location: Santiago, RS/ Brasil
Send a message via MSN to smartx21 Send a message via Skype™ to smartx21
Default My first DIY amp!

This is my very first complete build. A very nice amp with parts from various group buys. Hope will play as good as when was being tested!
Regards,
Max.
Attached Images
File Type: jpg DSC00355.JPG (136.6 KB, 1315 views)
File Type: jpg DSC00356.JPG (143.9 KB, 1199 views)
File Type: jpg DSC00357.JPG (140.9 KB, 424 views)
File Type: jpg DSC00358.JPG (152.2 KB, 322 views)
File Type: jpg DSC00360.JPG (150.0 KB, 252 views)
File Type: jpg DSC00361.JPG (136.5 KB, 247 views)
File Type: jpg DSC00362.JPG (159.8 KB, 257 views)
File Type: jpg DSC00363.JPG (127.5 KB, 296 views)
File Type: jpg DSC00364.JPG (98.2 KB, 346 views)
File Type: jpg DSC00365.JPG (137.3 KB, 355 views)
__________________
Regards,
Andres
  Reply With Quote
Old 13th December 2010, 08:23 PM   #1657
diyAudio Member
 
Join Date: Mar 2010
Location: Santiago, RS/ Brasil
Send a message via MSN to smartx21 Send a message via Skype™ to smartx21
Default It is DIY, isn't it?

More pics.
Cheers,
Max.
Attached Images
File Type: jpg DSC00366.JPG (126.6 KB, 390 views)
File Type: jpg DSC00367.JPG (170.9 KB, 300 views)
File Type: jpg DSC00340.JPG (124.0 KB, 273 views)
File Type: jpg DSC00344.JPG (187.1 KB, 288 views)
File Type: jpg DSC00352.JPG (135.0 KB, 252 views)
File Type: jpg DSC00339.JPG (182.7 KB, 349 views)
__________________
Regards,
Andres
  Reply With Quote
Old 13th December 2010, 08:54 PM   #1658
diyAudio Member
 
mikesnowdon's Avatar
 
Join Date: Aug 2007
Clever idea for mounting the transformer What are thos rubber rings you are using?

Your amp looks great so far!
__________________
www.drugfreeworld.org
  Reply With Quote
Old 13th December 2010, 09:03 PM   #1659
diyAudio Member
 
Join Date: Mar 2010
Location: Santiago, RS/ Brasil
Send a message via MSN to smartx21 Send a message via Skype™ to smartx21
Quote:
Originally Posted by mikesnowdon View Post
Clever idea for mounting the transformer What are thos rubber rings you are using?

Your amp looks great so far!
Thanks!
Well, I don't know exactly! They are some parts from my old car
I used them to lift the transformers, in order to have space for air flow, since original holes in case were just a few on top cover!
__________________
Regards,
Andres
  Reply With Quote
Old 13th December 2010, 09:06 PM   #1660
farjon is offline farjon  Brazil
diyAudio Member
 
farjon's Avatar
 
Join Date: Jul 2003
Location: Rio de Janeiro, RJ
This is what people call "Thinking Out of the Box" (no pun intended)...

Click the image to open in full size.

New and clever ideas for the old problem of fitting many boards in one place. Congratulations Smartx21, this will inspire me in the future.



Regards.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 06:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2