Member
Joined 2009
Paid Member
Member
Joined 2009
Paid Member
1/ 'thimios' (paid up front)
2/ 'ian finch' (paid up front)
3/ 'minek123' (paid up front)
your Christmas Cards are in the mail...
2/ 'ian finch' (paid up front)
3/ 'minek123' (paid up front)
your Christmas Cards are in the mail...
Member
Joined 2009
Paid Member
Member
Joined 2009
Paid Member
They're in the mail.
... and thanks Hugh. Hope that you and your family enjoy the Christmas holidays too !
Member
Joined 2009
Paid Member
You want to choose a n-type FET with same footprint, good for 150V, at least 30A, low (10’s mOhm) on resistance and a good Safe Operating Range. A quick look suggests IXFP110N15T2
IXFP110N15T2 IXYS | Mouser Greece
IXFP110N15T2 IXYS | Mouser Greece
Hi Bigun,
I finally started working again on my projects. I took a long break and sold many other projects that were piling... The usual DIYer... 🙂
Speaker protections are both working but I'm planing to get them off-board with a separate supply as I always do.
Amps are working perfectly. I truly love the bass from this amplifier, very hard to believe until you hear it! Solid, in control of the speaker, I mean just perfect!
Now, to find a suitable chassis!
Ciao!
Do
I finally started working again on my projects. I took a long break and sold many other projects that were piling... The usual DIYer... 🙂
Speaker protections are both working but I'm planing to get them off-board with a separate supply as I always do.
Amps are working perfectly. I truly love the bass from this amplifier, very hard to believe until you hear it! Solid, in control of the speaker, I mean just perfect!
Now, to find a suitable chassis!
Ciao!
Do
Hi Bigun,
although I have (made) so many amps already I would like to make a TGM8 too!
How can I buy a set of pcbs from you? Are there still some available?
all the best
Klaus (aka lohk)
although I have (made) so many amps already I would like to make a TGM8 too!
How can I buy a set of pcbs from you? Are there still some available?
all the best
Klaus (aka lohk)
Member
Joined 2009
Paid Member
Do, glad tohear you are enjoying the amps!
Klaus, I believe there is still another set of pcb’s left over. Check for a PM.
Klaus, I believe there is still another set of pcb’s left over. Check for a PM.
Member
Joined 2009
Paid Member
I received a nice card or two in the mail today. It seems Canada post has come good for outgoing mail too. A very nice and compact seasonal presentation, thanks Gareth. Now all that's needed is a few more parts... always not enough parts or the wrong size 😉
Member
Joined 2009
Paid Member
Hi Bigun,
I’m also interested in making a build, but if I read the above right All pcb-sets are gone for this time around, right?
Best,
Mikael
I’m also interested in making a build, but if I read the above right All pcb-sets are gone for this time around, right?
Best,
Mikael
Member
Joined 2009
Paid Member
Got a nice letter the other day - while I was at work at the university. Since it was a red colored one, my wife thought it might be a love letter. And she did not write it.
I told her later that she was only partly right, and should not be too worried. But, yes, it is complicated.
(thanks Gareth, for these nice, slightly demanding project!)
I told her later that she was only partly right, and should not be too worried. But, yes, it is complicated.
(thanks Gareth, for these nice, slightly demanding project!)