Thanks Olaf for the information. I did check the site and for India, default shipping is 22EUROS. Way above my budget!. Ok, I will keep looking for a cheaper alternative.
Like I had said before, i enjoy your builds and nice that you test every design before you post files... hats off!!
reg
Prasi
Hi, thanks.
I couldt not see any oscillations while testing. Also the Zobel was always cold.
regards Olaf
prasi check out this website I think the price is ok China PCB Prototype & Fabrication Manufacturer - PCB Prototype the Easy Way
Regards
Juan
Regards
Juan
thanks, 🙂 I might add a small coil there "I just like to see a nice coil there" you know me 😛 thanks a lot olafk
Regards
Juan
Sorry Prasi, in germany the smalest price is 15,89 EUR for shipping by registered parcel up to 2kg to india.
regards Olaf
sprint file to board house
Olaf,
SR60 a nice board and Test- is a Amp "must build" i have 25 of 1837/4793 to
build in, in a good one.
Anyone has done a little order of boards now? 🙂
Olaf,
SR60 a nice board and Test- is a Amp "must build" i have 25 of 1837/4793 to
build in, in a good one.
Anyone has done a little order of boards now? 🙂
Have fun!Olaf,
SR60 a nice board and Test- is a Amp "must build" i have 25 of 1837/4793 to
build in, in a good one.
Anyone has done a little order of boards now? 🙂
regards Olaf
Hi Olaf,
what are comparison of sound of SR100 and SR60?... just asking as you have built both of them...🙂
Oh, oh! I have built the SR100 over 2 years ago and the modules were never installed in a complete amplifier. The time has never been enough and there were so many new ones to test. Forgive me, but it's not really possible without to hear the SR100 again 🙂.
It may be that they are more comparable.
Sorry again and regards
Olaf
Hi, here are the Gerber files. I hope everything is okay. I have little experience with it. No guarantee. Maybe someone can look at this in a Gerber-Viewer.
Thanks Olaf, will try it.
My Gerber- Viewer is going to anywhere ?- not to find- hmmm... scratch had.
Have done- and not converted to eagle- i wish i know a little bit more- have to learn!
My Gerber- Viewer is going to anywhere ?- not to find- hmmm... scratch had.
Have done- and not converted to eagle- i wish i know a little bit more- have to learn!
Hi,
kikipcb i've tried- no answer yet and dirty seems that it not worked.
Thank you for generously offer- have to wait a bit.
If the order was successfully i will give other members with spare boards build SR60.
kikipcb i've tried- no answer yet and dirty seems that it not worked.
Thank you for generously offer- have to wait a bit.
If the order was successfully i will give other members with spare boards build SR60.
Hi Olaf,
Gerber works, order placed- now its time to relax, wait and cup of tea or something.
Gerber works, order placed- now its time to relax, wait and cup of tea or something.
