Finished CDROM controller based on P89S52, including 1602 LCD and remote handset.
keyboard and remote control
Play / pause
next/ pre
stop
... ...
It work well with most of the CDROMs, but not the all
The price is very low at this period ^_^
Only 13 EUR / 20 USD , International shipping may cost about 6 EUR (SAL service from China-Post)
Small order Paypal is also accepted, big order I prefer Bank transfer
Don't mind to ask me any question about it
Regards
bbp
keyboard and remote control
Play / pause
next/ pre
stop
... ...
It work well with most of the CDROMs, but not the all
The price is very low at this period ^_^
Only 13 EUR / 20 USD , International shipping may cost about 6 EUR (SAL service from China-Post)
Small order Paypal is also accepted, big order I prefer Bank transfer
Don't mind to ask me any question about it
Regards
bbp
Attachments
Could you let me know a few more details - like what power supplies do I need (would a PC supply do?). Also will this work a DVD drive (older CDROM drives are getting hard to find around here)
I am interested though - please email me!
Fran
I am interested though - please email me!
Fran
Thanks for the mail BBP.
Another question: Does your kit take the TTL signal from the CDROM and output SP/DIF? Or do I need to try and find a CDROM that will output a true SP/DIF signal?
Other than that detail I'm ready to go on this one. What is the total amount including shipping to Ireland?
thanks,
Fran
Another question: Does your kit take the TTL signal from the CDROM and output SP/DIF? Or do I need to try and find a CDROM that will output a true SP/DIF signal?
Other than that detail I'm ready to go on this one. What is the total amount including shipping to Ireland?
thanks,
Fran
Thanks for all
Please allow me to make a user manual later and upload it here.
For the security reason of the Beijing Olympic games, I have to check for more shipping information from the post-office. (China-post limited the shipping of electrical goods >_< )
regards
bbp
Please allow me to make a user manual later and upload it here.
For the security reason of the Beijing Olympic games, I have to check for more shipping information from the post-office. (China-post limited the shipping of electrical goods >_< )
regards
bbp
Thanks BBP,
that sounds like a good idea. I;m not worried about waiting until after the olympics - loads on my plate here right now.
Looking forward to having a read of the manual. I reckon I have a power supply and an HP CD drive that will work OK.
Fran
that sounds like a good idea. I;m not worried about waiting until after the olympics - loads on my plate here right now.
Looking forward to having a read of the manual. I reckon I have a power supply and an HP CD drive that will work OK.
Fran
Hello,
I'm interested in the CD-ROM controller but I have a question first.
Does the CD spin with normal speed like a common CDP or does it spin with high rpm so that it makes noise?😕
Thanks in advance.
Best regards
Josch
I'm interested in the CD-ROM controller but I have a question first.
Does the CD spin with normal speed like a common CDP or does it spin with high rpm so that it makes noise?😕
Thanks in advance.
Best regards
Josch
woodturner-fran said:
Joschl said:
korben69 said:
Hi Fran, I am searching for the local Express Agency now ^_^
Hi Josch,Korben69, The CDROM works in CLV mode with Controller like the cd player, so it will not cause the noise problem from high speed.
xcicc said:
Predator864 said:
Hi, the controller is still available, but I am searching for the way of shipping.
regards
bbp
🙂
- Status
- Not open for further replies.