Ok nobody seems to be able to answer this. On my head unit the output for each channel is L-3.93V and R-3.93V feeding each channel into a mono amplifier I know the signals are combined but are the voltages also? Do I add them together to get 7.86V ? I know if I disconnect one side it get quieter so it is cutting voltage. Any help would be greatly appreciated, trying to set the gain input level properly (1V, 2V, 4V, 8V, 16V) on mt Kicker sx1250.1's. Polo..
Most automotive mono amps add the L and R inputs together to form the output
To set the output you really shouldn't go by the markings on the amp though, they're very unreliable
http://www.resnet.trinity.edu/areynol1/gain.htm
To set the output you really shouldn't go by the markings on the amp though, they're very unreliable
http://www.resnet.trinity.edu/areynol1/gain.htm
Ok my amp is digital, in the beginning of the menu it asks what input gain level setting. I need to meaure the appropriate voltage which I did then select the desired setting, I will either select the 8V or 4 V setting. After the gain range is set I can accurately go ahead and adjust the amplifier gain. This has a line driver and digital signal processor built in. Range setting and gain level are two different things on this amp. All I need to know if the voltages combine 3.93+3.93V= 7.86V? Polo...
All I need to know if the voltages combine 3.93+3.93V= 7.86V
No,Use the 4V setting.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Electronics Gurus.