Night vision goggles to look at wet clams in the dark.
www.youtube.com/watch?v=FN9aS4m9tnI&feature=related
www.youtube.com/watch?v=FN9aS4m9tnI&feature=related
sorry jacco,
Dieses Video enthält Content von WMG. Es ist in deinem Land nicht mehr verfügbar!
was all I could see from the video at youtube....
Dieses Video enthält Content von WMG. Es ist in deinem Land nicht mehr verfügbar!
was all I could see from the video at youtube....
all clear, Zen Master where are you..........
Please write us a message without using a PC or let us hear your voice on the monitor or.....
Please write us a message without using a PC or let us hear your voice on the monitor or.....
Last edited:
speaking of youschmuck - this one is most important these days
YouTube - Tribute to Japanese Shoya Tomizawa Pilot killed in accident on September 5, 2010
YouTube - Tribute to Japanese Shoya Tomizawa Pilot killed in accident on September 5, 2010
dear Zen Mod,😀
Is it possible to make the symmetrical wiring from the XLR to pumpkins input by close drilling all three cables together or must I buy shielded symmetrically cable?
Because Babelfish 2 has 20 db amplification I care now more for the hum, that was not so hearable with F4.
Of course also in the output stage, I try to optimize the mass points and cables.......🙂
Is it possible to make the symmetrical wiring from the XLR to pumpkins input by close drilling all three cables together or must I buy shielded symmetrically cable?
Because Babelfish 2 has 20 db amplification I care now more for the hum, that was not so hearable with F4.
Of course also in the output stage, I try to optimize the mass points and cables.......🙂
did you altered down Pumpkin gain ?
you can use shielded cable which you're using for your RCA lines - one shielded per phase
Yes changed gain, sounds very good now combined with babelfish 🙂🙂🙂🙂
So the cables for the + and - must not be a twin cable with a common shielding, they can be separated and have their own shielding.
O.k. I will try!😀
So the cables for the + and - must not be a twin cable with a common shielding, they can be separated and have their own shielding.
O.k. I will try!😀
Hi Zen Mod,🙂
I forgot when I decrease R5/R6 in Pumpkin I have to increase C1/C2 .....correct?
best for you!🙂
I forgot when I decrease R5/R6 in Pumpkin I have to increase C1/C2 .....correct?
best for you!🙂
naah ..... leave them as is
except in case that you have CRO and can look at rectangle
buzz/hum solved ?
except in case that you have CRO and can look at rectangle
buzz/hum solved ?
too late I already doubled them...😀
Yes! I have CRO at school a and I will look for the rectangle at .......? kHz?
Yes! I have CRO at school a and I will look for the rectangle at .......? kHz?
naah ...... just chill
either with nice beer or nice wine , listening da muzak
who cares for little ringing here and there ....... if at all
either with nice beer or nice wine , listening da muzak
who cares for little ringing here and there ....... if at all
Chilling...? I will do when I am old!😡
I went to school, took the oscilloscope and looked first time on the different waveforms with Pumpkin. Was very interesting..... No overshot at all! Not even at 100kHz!
Now I can chill indeed ........🙂🙂🙂
I went to school, took the oscilloscope and looked first time on the different waveforms with Pumpkin. Was very interesting..... No overshot at all! Not even at 100kHz!
Now I can chill indeed ........🙂🙂🙂
So - seems that I have my Paypal sorted , at last ;
There was/is one glitch - I was given by mistake with Maestro card , instead of Visa - so I was unable to to lift Paypal limits for money withdrawal .
Anyway , just yesterday I manage to solve that , and I'm expecting Visa plastic to arrive in 10 or so days , then I'll be able to lift limits and transfer any amount to bank account .
Paypal account is active , withdrawal is just matter of time .
New batch of pcbs is ordered and they'll be at my bench also in 10 days or so ; other parts are in drawers , including matched mosfet outputs .
You can reach me for this on >greedyzenmod@gmail.com<
please include Pumpkin in subject
then I'll give you more details
Cheers !
There was/is one glitch - I was given by mistake with Maestro card , instead of Visa - so I was unable to to lift Paypal limits for money withdrawal .
Anyway , just yesterday I manage to solve that , and I'm expecting Visa plastic to arrive in 10 or so days , then I'll be able to lift limits and transfer any amount to bank account .
Paypal account is active , withdrawal is just matter of time .
New batch of pcbs is ordered and they'll be at my bench also in 10 days or so ; other parts are in drawers , including matched mosfet outputs .
You can reach me for this on >greedyzenmod@gmail.com<
please include Pumpkin in subject
then I'll give you more details
Cheers !
I want to build pumkin to drive my Aleph mini(30w chipamp PCB). I am a lo-fi , put pretty colors in my music kind guy. I want to have volume and tone controls in Pumpkin. Does pumpkin have enough gain to handle tone control circuit or should I increase gain? ( please dont flame me for this, this may have been discussed before, but I could get passed 500 post)
is made to drive balanced F4 , so it have enough gain 😉how you'll include tone stack - don't know right now , just because I mess with tone stack ages ago , so I forgot everything
do you know by chance - what's insertion loss of your (passive ? ) tone network ?
Sorry, no clue, it sounds some Greek to me.😕 May be I need to take some on line electronic college classes first to monkey with amps.😀 I just have limited knowledge on electronics and dumb ears too. Can you suggest a tone control mod??