Pinout diagram needed for M-Audio 2496 DB9 connector

[oncable]

Hi all
I have an M-Audio Audiophile 2496 soundcard but do not have the breakout cable that should come with it (I bought it on Ebay). I would like to connect my music keyboard to the card's DB9 connector via midi in/out. I have the DB9 male connector but to make the proper cable I need a pinout diagram of the female DB9 on the card. I have searched the net for many hours and it seems that M-Audio has done an excellent job of keeping their pinouts secret! Does anyone have any tips?
thanks in advance,

[Netlist]

I have no idea if this could help but I'm trying anyway.

/Hugo

[dioveht]

I have the same problem: Audiophile 2496 without the cable...

someone found pinout diagram?

[oncable]

I have the same problem too. I bought an M-audio audiophile 2496 on Ebay and it didn't come with the breakout cable so I need the pinouts to get digital out. Anyone found it?
thanks,

[jb74]

Here are some photos of my own breakout cable that was supplied with a new Audiophile 2496 card

Perhaps you can figure out the connections you need from these
photos - (no guarantees)

This first photo shows the entire breakout cable - it has a MALE
9 pin connector that connects to the card

It has two female 5 pin din connectors and two rca type female
connectors

One of the 5 pin din connectors is labeled "out"
and the other 5 pin din connector is labeled "in"

One of the rca connectors is labeled "out"
and the other rca connector is labeled "in"

I will post other photos to show how the pins on the MALE 9 pin
connector relate to the female 5 pin din and the female rca
connectors

[jb74]

9 pin male end labeled

[jb74]

more photos

[jb74]

S/PDIF out

[jb74]

Midi connector out

[jb74]

female Midi in