Me too: THANKS VERY MUCH!
Hi,
I just wanted to chime in and express my gratitude as well to the original poster of this information (and to DIY Audio for keeping it archived and available!)
I found an M-Audio AP2496 at a thrift store (!) - no breakout cable included of course, and am just recently putting it to use. Although it is a discontinued product, M-Audio still has updated drivers available, and so far, the card performs very well in my Win7 x64 machine. Hopefully, I can build this breakout cable to route the S/PDIF output to a DAC on my house stereo system.
Wilf
Hi,
I just wanted to chime in and express my gratitude as well to the original poster of this information (and to DIY Audio for keeping it archived and available!)
I found an M-Audio AP2496 at a thrift store (!) - no breakout cable included of course, and am just recently putting it to use. Although it is a discontinued product, M-Audio still has updated drivers available, and so far, the card performs very well in my Win7 x64 machine. Hopefully, I can build this breakout cable to route the S/PDIF output to a DAC on my house stereo system.
Wilf
Hi, Im doing my own cable now, thanks of your usefull information
I have a simple cable that is 2 conector + shield (Im only want DB9 from maudio card to MIDI IN to my e-drum), So, my question is if this is right? I need conect de shield in any point or just, like de pinout said, 9 and 5 (dbi9) to 4 n 5 (midi in)?
Cheers
I have a simple cable that is 2 conector + shield (Im only want DB9 from maudio card to MIDI IN to my e-drum), So, my question is if this is right? I need conect de shield in any point or just, like de pinout said, 9 and 5 (dbi9) to 4 n 5 (midi in)?
Cheers
Hi, Im doing now my own cable thanks you for this usefull info
Also, I have this question; I have a simple cable with 2 cable + shield (cause I just want a db9 from my m-audio and Midi in to my e drums) So, ¿just conect, like the pinout said, 9 and 5 (db9) to 4 n 5 (midi in)? I need conect the shield or anything else?
Cheers
Also, I have this question; I have a simple cable with 2 cable + shield (cause I just want a db9 from my m-audio and Midi in to my e drums) So, ¿just conect, like the pinout said, 9 and 5 (db9) to 4 n 5 (midi in)? I need conect the shield or anything else?
Cheers
Thanks a ton for these information.
I've bought this card from a guy online, and it didn't come with the breakout cable. However, I didn't need it becouse I had a usb midi device. It happened that it recently broke, so I had to ask a friend of mine to make this cable. He made it, but as I only needed it for Midi IN/OUT, he had only done it as a 9 pin to MIDI.
Unfortunately, it doesn't work.
I know that it's a long gone thread, but could someone explain what could go wrong? Does it have to connect SPDIF as well as MIDI? In the meantime, I sent him the pinout diagram, who knows, maybe he got the wirings wrong.
Cheers
I've bought this card from a guy online, and it didn't come with the breakout cable. However, I didn't need it becouse I had a usb midi device. It happened that it recently broke, so I had to ask a friend of mine to make this cable. He made it, but as I only needed it for Midi IN/OUT, he had only done it as a 9 pin to MIDI.
Unfortunately, it doesn't work.
I know that it's a long gone thread, but could someone explain what could go wrong? Does it have to connect SPDIF as well as MIDI? In the meantime, I sent him the pinout diagram, who knows, maybe he got the wirings wrong.
Cheers
Hi,
Here attached is the M-Audio official AP2496 pinout diagram.
Cheers!
All these years later!!!
Your diagram is still contributing to us music makers
A very big thank you.
Hi,
Here attached is the M-Audio official AP2496 pinout diagram.
Cheers!
Thank you so much you saved my life. Lost that breakout cable and want to test the edrum midi device by Admir Salahovic.
- Home
- Design & Build
- Parts
- Pinout diagram needed for M-Audio 2496 DB9 connector