"The Wire" Ultra-High Performance Headphone Amplifier - PCB's - Page 9

NICKEL · 31st December 2010, 09:53 PM

Hi Owen

Sorry, I'll cancel my order for a kit.
It's more than I can cope with.

Cheers

Nick

Nikon1975 · 1st January 2011, 12:12 PM

I will stay with one kit and one extra board.

Thanks,

D.

dggs · 2nd January 2011, 05:47 AM

Hi Owen,

I'd like to get 2 sets of PCBs.

Thanks!

meanman1964 · 2nd January 2011, 09:22 AM

Do you have boards left and how much do they cost with shipping to Belgium?

Gordy · 11:07 AM

Owen, just had another look at the graphs you posted... do you have one available for THD sweep against frequency? If not perhaps you could make one when you do your further tests? Would be great to see that graph, especially with unbalanced input and 2k ohm source resistance (say, at about 50 mW into 30R with parallel capacitance).

icewall · 2nd January 2011, 12:10 PM

Do you have boards/complete kits left and how much do they cost with shipping to Sweden?

ccliu · 2nd January 2011, 01:31 PM

Hi Owen,

I would like to have one full kit (PCBs and parts).
Thanks!!

Nikola Krivorov · 2nd January 2011, 01:49 PM

Count me in for a full kit too and the boards if not included in it.

Happy 2011!

opc · 02:48 PM

Hi Guys,

I'll update the list and re-post it tonight. To be clear - The kit price includes the parts listed in the BOM, both PCB's, and shipping to anywhere.

icewall and meanman 1964:

Please go back and read at least the last three pages of this thread. Everything you asked is answered there. I can't re-post the same info on every page.

Cheers,
Owen

meanman1964 · 2nd January 2011, 03:31 PM

Quote:

Originally Posted by opc

Hi Guys,

I'll update the list and re-post it tonight. To be clear - The kit price includes the parts listed in the BOM, both PCB's, and shipping to anywhere.

icewall and meanman 1964:

Please go back and read at least the last three pages of this thread. Everything you asked is answered there. I can't re-post the same info on every page.

Cheers,
Owen

Thanks did find it

2nd January 2011, 11:04 AM	#85
Gordy diyAudio Member Join Date: Nov 2006	Owen, just had another look at the graphs you posted... do you have one available for THD sweep against frequency? If not perhaps you could make one when you do your further tests? Would be great to see that graph, especially with unbalanced input and 2k ohm source resistance (say, at about 50 mW into 30R with parallel capacitance). Last edited by Gordy; 2nd January 2011 at 11:07 AM.

2nd January 2011, 12:10 PM	#86
icewall diyAudio Member Join Date: Jun 2005 Location: Umeå	Do you have boards/complete kits left and how much do they cost with shipping to Sweden? __________________ - nerver stop exploring -

2nd January 2011, 02:45 PM	#89
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	Hi Guys, I'll update the list and re-post it tonight. To be clear - The kit price includes the parts listed in the BOM, both PCB's, and shipping to anywhere. icewall and meanman 1964: Please go back and read at least the last three pages of this thread. Everything you asked is answered there. I can't re-post the same info on every page. Cheers, Owen Last edited by opc; 2nd January 2011 at 02:48 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which Pass Aleph diy board for "no-cost-object" headphone amplifier?	Hammerklavier	Headphone Systems	43	7th August 2010 03:35 PM
Improvments to "Tube Headphone Amplifier/Preamp with Relay-Based Input and Power Swi"	kipman725	Headphone Systems	4	17th August 2009 06:12 PM
Project 11.1 from Slone "High-Power Amplifier" Book	Karl71	Solid State	46	6th October 2008 03:47 AM
The "Freebird" ultra clean ultra simple preamp design	Russ White	Chip Amps	87	11th August 2008 09:28 AM
My A.N.T. "Amber" headphone amplifier	x-pro	Headphone Systems	8	1st October 2007 08:47 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st December 2010, 09:53 PM	#81
NICKEL diyAudio Member Join Date: Aug 2005	Hi Owen Sorry, I'll cancel my order for a kit. It's more than I can cope with. Cheers Nick

1st January 2011, 12:12 PM	#82
Nikon1975 diyAudio Member Join Date: Nov 2009 Location: Vienna	I will stay with one kit and one extra board. Thanks, D.

2nd January 2011, 05:47 AM	#83
dggs diyAudio Member Join Date: Mar 2003 Location: silicon valley	Hi Owen, I'd like to get 2 sets of PCBs. Thanks!

2nd January 2011, 09:22 AM	#84
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	Do you have boards left and how much do they cost with shipping to Belgium?

2nd January 2011, 01:31 PM	#87
ccliu diyAudio Member Join Date: Oct 2007	Hi Owen, I would like to have one full kit (PCBs and parts). Thanks!!

2nd January 2011, 01:49 PM	#88
Nikola Krivorov diyAudio Member Join Date: Apr 2008	Count me in for a full kit too and the boards if not included in it. Happy 2011!

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read