This is a pre-curser...if i like what I hear.
Chances are you will not like what you hear. I believe you meant precursor.
Here is BOM for stereo pair. I can purchase the BF 862 in a reel and match if interested, I haev found that when these things are purchased in qty and are in factory packaging, they tend to be fairly tightly matched. I also have the MUR 860 leftover from a previous GB, as well as some of the Vishay caps, if anyone is interested. It looks like a stereo pair of boards will be $35
Attachments
The board house wants $20 per board to solder the SMD components. I am hesitant to force all to do so. What do you guys think? If just a few need this help, I can arrange to do so personally for similar price. We will see if there is a consensus one way or the other.
I'll take you up on the offer and price to have the SMD compondents soldered.
are the 2 pairs of jfets paralleled in the input there to allow the use of bl range devices? Couldn't we get away with one bl pair?
I have two suggestions:
Arrange input pairs to allow thermal coupling with zip tie arrangement.
Have a breakup line between the psu and line sections, this would allow to break of the psu section and use a single psu for both channels, for transformers with single secondary.
Ps: buzzforb, sent you a pm a couple of days ago, did you receive it?
I have two suggestions:
Arrange input pairs to allow thermal coupling with zip tie arrangement.
Have a breakup line between the psu and line sections, this would allow to break of the psu section and use a single psu for both channels, for transformers with single secondary.
Ps: buzzforb, sent you a pm a couple of days ago, did you receive it?
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Juma's LSK Preamp - SMD version