I have several full kits or minikits, and boards.
Please private message me what you would like and I can send you more details.
Regards,
Mike Thomas
Extreme GTAC
Wrong thread,
But the DCB1 full kits should be available in 3 weeks. I have most parts ready and packed, just waiting on some fets.
There will be more voltage drift with K170 but it can replace it. At least until you get a genuine K117GR. Use K170GR or the lowest IDSS K170BL you have.
The GB for the Salas board is open for payment up until 11:59PM EST 1/24/2016.
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on areasonable wholesale price.
Shipping
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00-12 to ship. Starting price for shipping is 8.00 for just a small board and can rise from there.
The boards will ship around 2-3 weeks after the GB closes typically. The boards need to be ordered, I don't have them on hand.
SSHV2 - High Voltage Shunt Regulator
Here is a link to the first post of GB Thread which includes the Construction Guide. It also mentions the parts used in the minikits.
http://www.diyaudio.com/forums/group-buys/206033-gb-salas-sshv2-regulator.html#post2892748
The SSHV2 boards are 15.00 each.
The Resistor Minikits are 8.00 each
The transistor kits are 10.00 each
Full kit to populate board only is 40.00
All mini kit parts are listed in the mini kit BOM section listed at bottom of message
Build up unit pic.
MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on areasonable wholesale price.
Shipping
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00-12 to ship. Starting price for shipping is 8.00 for just a small board and can rise from there.
The boards will ship around 2-3 weeks after the GB closes typically. The boards need to be ordered, I don't have them on hand.
SSHV2 - High Voltage Shunt Regulator
Here is a link to the first post of GB Thread which includes the Construction Guide. It also mentions the parts used in the minikits.
http://www.diyaudio.com/forums/group-buys/206033-gb-salas-sshv2-regulator.html#post2892748
The SSHV2 boards are 15.00 each.
The Resistor Minikits are 8.00 each
The transistor kits are 10.00 each
Full kit to populate board only is 40.00
All mini kit parts are listed in the mini kit BOM section listed at bottom of message
Build up unit pic.
MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
Sure, I have some extra to sell.
Please read post 654# and private message me what your looking for.