PCB order for Goldmun clone

[bigpanda]

Hi guys

This GB has been setup for the Thread : "The Very Best Amplifier I Have Ever Heard!!!! " # 174468



Please make my work easier by leaving information as follow :


Subject : PCB order for Goldmun clone
Content : <forum ID>;<email address (paypal a/c)>;M-99;P-99

There might be still some uncertainty about the pcb. But the price will be right if no change in pcb size.

Cost for protection PCB estimate to be $8 (should not exceed $9)

Will post status everyday after Oct 15

[bigpanda]

Pls sent email to : tony_chan_cf@email.com
as follow :


Subject : PCB order for Goldmun clone
Content : <forum ID>;<email address (paypal a/c)>;M-99;P-99

[NagysAudio]

Please officially put my order in for 2 pairs of the double sided main circuit PCB and 2 pairs of the single sided (smaller) protection circuit PCB. A total of 8 boards.

[bigpanda]

Please note that the spec. for the board is here :
The Very Best Amplifier I Have Ever Heard!!!!



Post # 94

which status :

FR-4 1.6mm
Dimension : 162 x 87mm
Copper tk : 2 oz, tinned, single side with soldering mask
white silkscreen printing on component side



the Dimension has been updated to 205x88mm and it is now a double side pcb. Other spec stays the same.




New spec.

FR-4 1.6mm
Dimension : 205 x 88mm
Copper tk : 2 oz, tinned, double side with soldering mask
white silkscreen printing on component side


It is tin plated not "Electroless Nickel"


Please read before placing your order .

[fredlock]

Tony, you got mail.

[bigpanda]

Hi guys,


Please send your mail order as shown in attach screen dump.

copy and paste to subject of the email (skip quotes) :
"<-----PCB order for Goldmun clone----->"

Enter your information as in the screen dump.


Please help me work on this. My eyes cannot hold on any longer if I am to go thru all those emails to find yours. You can leave the paypal a/c for the time being but must key in your forum ID. No orders will be process w/o forum ID


Only information on orders in the emails. For other things, communicate thru seperate email or forum.

[bigpanda]

Latest update on boards :

I am still waiting for Alex to give me the dimension for the protection board.

I have some problems with the gerber files for the pcb but I think Alex should be able to solve that.


Since Nagys has asked me about the finish of the copper, I asked my fab. house about that and they quote me that if I am asking for a "Electroless Nickel" finish, price for the main board goes up $1 / pair.

I had been using "tin plated" boards all along my past years and I do not have a clue if "Electroless Nickel" is any better.

[bigpanda]

Status of GB as of 2010.10.14.2255

[NagysAudio]

bigpanda - Let's do "Electroless Plating." I sent you an email.

[bigpanda]

Sorry, in Post#7 I quote :

Since Nagys has asked me about the finish of the copper, I asked my fab. house about that and they quote me that if I am asking for a "Electroless Nickel" finish, price for the main board goes up $1 / pair.

The increase for "Electroless Nickel" finish is $1 / pcs not pair. My apology for my carelessness.