Semisouth JFET GB

Magura · 04:34 PM

So, a Southsemi JFET GB.

A rough calc says around 50usd a piece, if we reach at least 100 pieces.

Shipping cost will be quite a bit less, if somebody volunteers to distribute them in the States.

To make this happen within a reasonable time limit, deadline is set to Sunday October 11th.

Magura

EDIT: TeaBag will do the distribution in the states.

Magura · 21st September 2009, 04:25 PM

The list so far:

Tea bag : 4

tryonziess · 21st September 2009, 04:44 PM

I am really interested in these. What particular amp design are you proposing to use them in?
Tad

Magura · 21st September 2009, 04:48 PM

One use could be this FirstWatt J2

Now PLEASE don't clutter up this thread.

This is going to be plenty hard keeping track of as it is.

This thread is exclusively for signing up for the GB.

Magura

mos57 · 21st September 2009, 05:07 PM

Hi Magura, i will buy a lot of 8 matched devices.
Are they the SJEP120R125 or other bigger devices?
Can you arrange shipment for european buyers?
Thanks, Francesco.

Magura · 05:17 PM

I take care of any other destinations, than the states, so yes.

There are so far no price for matched, and if there are going to be any matched (depending how big interest), the price is going to be higher than 50usd a piece.
The reason for this, is that I would not expect to be able to match sets of more than 4, if no more than 100 fets are bought. This would also leave a lot of unusable parts as leftovers from the matching, which in turn would make the price a lot higher.

So please sign up for the number of unmatched fets you want now, and I will look into the feasibility of matching devices later.

Magura

Magura · 21st September 2009, 05:24 PM

Having said that, this naturally applies only if a limited amount of fets are ordered.
If we reach 300+, matching in banks of 4 would be a smaller deal, and a lot cheaper to do.

But let's see how many are interested, I personally don't expect to end up much above 150, and then it's an expensive game to match.

Magura

mos57 · 21st September 2009, 06:02 PM

Okay, sign me in for 8 pieces.

Francesco.

Zen Mod · 06:09 PM

Metaldanske

before making anything really foolish , be sure to have Papa'a direct answer - is matching necessary ..... at least for his own type of Drek amp .

Magura · 21st September 2009, 06:08 PM

The list so far:

Tea bag : 4

mos57: 8

21st September 2009, 04:24 PM	#1
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	Semisouth JFET GB So, a Southsemi JFET GB. A rough calc says around 50usd a piece, if we reach at least 100 pieces. Shipping cost will be quite a bit less, if somebody volunteers to distribute them in the States. To make this happen within a reasonable time limit, deadline is set to Sunday October 11th. Magura EDIT: TeaBag will do the distribution in the states. __________________ Everything is possible....to do the impossible just takes a little while longer. Last edited by Magura; 21st September 2009 at 04:34 PM.

21st September 2009, 04:25 PM	#2
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	The list so far: Tea bag : 4 __________________ Everything is possible....to do the impossible just takes a little while longer.

21st September 2009, 04:48 PM	#4
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	One use could be this FirstWatt J2 Now PLEASE don't clutter up this thread. This is going to be plenty hard keeping track of as it is. This thread is exclusively for signing up for the GB. Magura __________________ Everything is possible....to do the impossible just takes a little while longer.

21st September 2009, 05:14 PM	#6
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	I take care of any other destinations, than the states, so yes. There are so far no price for matched, and if there are going to be any matched (depending how big interest), the price is going to be higher than 50usd a piece. The reason for this, is that I would not expect to be able to match sets of more than 4, if no more than 100 fets are bought. This would also leave a lot of unusable parts as leftovers from the matching, which in turn would make the price a lot higher. So please sign up for the number of unmatched fets you want now, and I will look into the feasibility of matching devices later. Magura __________________ Everything is possible....to do the impossible just takes a little while longer. Last edited by Magura; 21st September 2009 at 05:17 PM.

21st September 2009, 05:24 PM	#7
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	Having said that, this naturally applies only if a limited amount of fets are ordered. If we reach 300+, matching in banks of 4 would be a smaller deal, and a lot cheaper to do. But let's see how many are interested, I personally don't expect to end up much above 150, and then it's an expensive game to match. Magura __________________ Everything is possible....to do the impossible just takes a little while longer.


<a rel='nofollow' href='http://www.diyaudio.com/openx/www/delivery/ck.php?n=aa5cb2e9&cb=852053' target='_blank'><img src='http://www.diyaudio.com/openx/www/delivery/avw.php?zoneid=3&cb=852053&n=aa5cb2e9' border='0' alt='' /></a>	We're saving for a new server - help us to serve you by Donating Today and become a friend with benefits! Ads on/off / Custom Title / 2009 Tshirt / More PMs / Bigger Images / Advanced printing

21st September 2009, 04:44 PM	#3
tryonziess diyAudio Member Join Date: Apr 2007	I am really interested in these. What particular amp design are you proposing to use them in? Tad

21st September 2009, 05:07 PM	#5
mos57 diyAudio Member Join Date: Apr 2006 Location: Catanzaro - italy	Hi Magura, i will buy a lot of 8 matched devices. Are they the SJEP120R125 or other bigger devices? Can you arrange shipment for european buyers? Thanks, Francesco.

21st September 2009, 06:02 PM	#8
mos57 diyAudio Member Join Date: Apr 2006 Location: Catanzaro - italy	Okay, sign me in for 8 pieces. Francesco.

21st September 2009, 06:05 PM	#9
Zen Mod diyAudio Member Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain	Metaldanske before making anything really foolish , be sure to have Papa'a direct answer - is matching necessary ..... at least for his own type of Drek amp . __________________ my Papa is smarter than your Nelson ! (tnx to , clean** thread is here ; Cook Book is here ) EX YU DiYA forum is here : http://www.diyaudio.rs/ Last edited by Zen Mod; 21st September 2009 at 06:09 PM.

21st September 2009, 06:08 PM	#10
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	The list so far: Tea bag : 4 mos57: 8 __________________ Everything is possible....to do the impossible just takes a little while longer.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SemiSouth SiC Power JFETs	RocketScientist	Solid State	68	30th October 2009 03:12 PM
Can I replace BF245C JFET with J201 JFET?	bigmike216	Parts	2	7th December 2005 07:50 AM
JFET and ZEN	Skorpio	Pass Labs	1	6th December 2005 10:30 PM

New To Site?	Need Help?
Register to Participate Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read