Anybody using the new ESS Vout DAC (ES9022)? - Page 3

EUVL · 24th December 2009, 08:58 PM

To give credit to ismosys, I got all the datasheets I asked for after signing an NDA.
The continental Eu representative has been very helpful. Thank you Olaf.

Best regards,rope
Patrick

jkeny · 25th December 2009, 12:07 AM

Yes Patrick, I find Jo from Ismosys, very responsive to requests.

Have you used the new ES9022 DAC yet?

mutter · 25th December 2009, 11:16 AM

Can anyone who has seen the datasheet give up the output DC offset numbers of the ES9022 or is that covered by NDA?

I've got a project that works with the WM8524 and was considering the other chips. However the AKM chip is going by the wayside as its output offset is too high for it to be DC coupled.

Guess I should talk to a North American rep...

EUVL · 26th December 2009, 09:08 AM

John, you have PM.

Patrick

FAA · 06:27 AM

Quote:

Originally Posted by ismosys

Hi, Product and support available from the European stockist Ismosys

Hi, I'm from the Philippines, Is it possible to order from your store? i'm interested with 50-100pcs ES9022.. I've tried to contact the Asian distributors but got no reply.. thanks

EUVL · 27th December 2009, 06:35 AM

Ismosys is only agent for Europe. Try an Asian distributor first.
If all fails, I can order for you, if you pay in advance.

Patrick

FAA · 27th December 2009, 06:43 AM

Hi Patrick,

I'm truly grateful to your offer.. thanks very much..

Yes i already contacted them several times this past few weeks but haven't heard a word from them..

Spartacus · 27th December 2009, 09:03 AM

Quote:

Originally Posted by FAA

Hi Patrick,

I'm truly grateful to your offer.. thanks very much..

Yes i already contacted them several times this past few weeks but haven't heard a word from them..

I got my Sabre from here .....

Home | Line One Sales

They are UK based. Very good service, although they are probably closed over Christmas.

EUVL · 27th December 2009, 10:33 AM

No ES9022, and UK only.

Patrick

Spartacus · 27th December 2009, 10:54 AM

Line One will almost certainly sell an ESS9022. If another supplier is no good, they may be able to help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Balanced jfet buffer for Vout DAC?	jonners	Solid State	7	22nd October 2010 07:57 AM
where to connect + wire for Vout?	jarthel	Power Supplies	2	27th March 2007 04:49 AM
Advice wanted - regulated PSU for Vin 42 V / Vout 25-40 V	Groundloops	Power Supplies	14	16th February 2007 01:13 PM
help in adjusting Vout in the power supply of the "Brute force in a line stage" by Er	jarthel	Tubes / Valves	9	30th May 2006 07:47 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th December 2009, 08:58 PM	#21
EUVL diyAudio Member Join Date: Oct 2003	To give credit to ismosys, I got all the datasheets I asked for after signing an NDA. The continental Eu representative has been very helpful. Thank you Olaf. Best regards,rope Patrick

25th December 2009, 12:07 AM	#22
jkeny Banned Join Date: Feb 2007 Location: Dublin	Yes Patrick, I find Jo from Ismosys, very responsive to requests. Have you used the new ES9022 DAC yet?

25th December 2009, 11:16 AM	#23
mutter diyAudio Member Join Date: Mar 2009	Can anyone who has seen the datasheet give up the output DC offset numbers of the ES9022 or is that covered by NDA? I've got a project that works with the WM8524 and was considering the other chips. However the AKM chip is going by the wayside as its output offset is too high for it to be DC coupled. Guess I should talk to a North American rep...

26th December 2009, 09:08 AM	#24
EUVL diyAudio Member Join Date: Oct 2003	John, you have PM. Patrick

27th December 2009, 06:35 AM	#26
EUVL diyAudio Member Join Date: Oct 2003	Ismosys is only agent for Europe. Try an Asian distributor first. If all fails, I can order for you, if you pay in advance. Patrick

27th December 2009, 06:43 AM	#27
FAA diyAudio Member Join Date: Oct 2009	Hi Patrick, I'm truly grateful to your offer.. thanks very much.. Yes i already contacted them several times this past few weeks but haven't heard a word from them..

27th December 2009, 10:33 AM	#29
EUVL diyAudio Member Join Date: Oct 2003	No ES9022, and UK only. Patrick

27th December 2009, 10:54 AM	#30
Spartacus diyAudio Member Join Date: Jan 2002 Location: Cheltenham	Line One will almost certainly sell an ESS9022. If another supplier is no good, they may be able to help.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)