Class A and A/B vs. Class D - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th December 2003, 09:14 PM   #1
diyAudio Member
 
Join Date: Oct 2003
Location: The Lab
Default Class A and A/B vs. Class D

This intended to be an open discussion about the acceptance of Class D in High Grade Audio Equipment.

As this technology emerges, with it's obvious benefits (at least for higher power levels) such as :

High Efficiency > 95%
No need for cooling
No need for large power supplies
Small size
Noise instead of harmonic distorsion (less disturbing to ear)
Low price
Ruggedness towards low speaker impedances.

What is the justification really for analog amplifiers anymore?

Are anybody experimenting with diy PWM amplifiers in here, and what are the results? What kind of problems did you run into?

What are the shortcomings of PWM vs. analog amplification or vise versa in your opinion?

(Just adding: i don't intend to say there is no longer a need for analog amplifiers, just wish to start a discussion about analog vs. PWM)
  Reply With Quote
Old 5th December 2003, 09:33 PM   #2
Account Disabled
 
Join Date: Apr 2003
Location: US
Default Re: Class A and A/B vs. Class D

Quote:
Originally posted by Lars Clausen
What are the shortcomings of PWM vs. analog amplification or vise versa in your opinion?

digital amps are also cheaper, offer a direct digital link to input digital signals, are easier to engineer as well.

analog is easier to put together (for diyers), offers more tweaks.

I think digital is the future, especially for commercial amps.
  Reply With Quote
Old 5th December 2003, 09:59 PM   #3
diyAudio Member
 
Jan Dupont's Avatar
 
Join Date: Apr 2003
Location: Copenhagen, Denmark
Send a message via MSN to Jan Dupont
Class D is very interesting, but regarding to sound and technique it is not yet fully developed....
But maybe in 2 or 3 years it would be more interesting
__________________
Free Schematic and Service Manual downloads www.audio-circuit.dk, Company: www.dupont-audio.com, Joint venture: www.DupontMantra.com
  Reply With Quote
Old 5th December 2003, 10:13 PM   #4
diyAudio Member
 
lieven's Avatar
 
Join Date: Aug 2002
Location: Belgium
http://www.semiconductors.philips.co.../TDA8924_1.pdf
  Reply With Quote
Old 8th December 2003, 12:48 PM   #5
djk is offline djk
diyAudio Member
 
djk's Avatar
 
Join Date: Feb 2001
Location: USA
"digital amps are also cheaper, offer a direct digital link to input digital signals, are easier to engineer as well."

Most commercial offerings are class D switching amplifiers, they cannot handle digital data.

"High Efficiency > 95%"

Only if you ignore losses in the output filter and comutating diodes. Large commercial switching amplifiers frequently employ forced air cooling for the output filter components. Driving reactive loads and depending on the body diode is a disaster. External diodes can run hotter than the switching FETs.

"No need for cooling"

The 20 year old Carver M1.5 puts out 1.5KW with no heatsink, no fan, and runs quite cool.

"No need for large power supplies"

Only if you need a large output. The above mentioned amplifier is 85% efficent on reactive loads (real loudpeakers). The 10% or so difference in supply size required is nill.

"Small size"

Six years ago I built a 100W stereo amplifier, pre-amp, image processor, 24dB crossover, headphone amplifier, on a board 4.5" X 5.5", the rectifiers, filter caps, and regulators were also on board. The heatsink was fan cooled. No surface mount parts were used, and the whole package was only 1" tall. The transformer was a desk top unit.

How much smaller do you need it?

"Noise instead of harmonic distorsion (less disturbing to ear)"

Yes, I agree harmonic distortion is less disturbing to the ear than noise.

"Low price"

The delivered to your door price on a Berhinger 2.4KW amplifier is $350. I see no switching amp near that power/price.

"Ruggedness towards low speaker impedances."

A matter of design. Making a switching amplifier short circuit proof is not a non-trivial matter. Its pretty cut-and-dried for analog.

Switching amplifiers could be the future, but as far as I am concerned, the future has not yet arrived.
  Reply With Quote
Old 8th December 2003, 01:05 PM   #6
diyAudio Member
 
Join Date: Mar 2003
Location: Haarlem, the Netherlands
I have no practical experience with class D amplifiers, but I can see at least two disadvantages compared to class AB. Firstly, class D amplifiers with a digital input which are basically power sigma-delta-DAC's have the disadvantage that they need an extremely clean supply, as the supply is basically the DAC's reference voltage. Secondly, both analogue and digital class D amplifiers often have a rather high output inductance due to the output filter, making the frequency response at high audio frequencies more dependent on the loudspeaker impedance.
  Reply With Quote
Old 8th December 2003, 07:16 PM   #7
diyAudio Member
 
Join Date: Oct 2003
Location: The Lab
MarcelvdG: You are right about these points, i agree completely with you that a purely digital solution is not optimal (even if it would at first thought appear to be).
Demand for Ultra stable power supply, and delay in feedback loop A/D + DSP handling of error signals, and partly also quantization noise in the feedback loop all contribute to additional distorsions, none of these problems exist in the 'analog PWM' approach.

Today i tested a new 'analog PWM' design, with a +/- 80 V DC supply with 2200 uF capacitance and a transformer of just 55 VA. As you might gather the supply was all but stable when loaded. But it still had a really good bass control and could produce something like 200 Watts in 8 Ohms for a half hour before the 55 VA transformer got too hot. (And the others had left the building because of loud Techno sounds)

djk: You surely seem to have some serious reservations towards the Class D technology However i will comment on one point:
If you calculate the efficiency to 95% or so, based on Input Power / Output Power, i don't see how you can have: (quote) 'ignore losses in the output filter and comutating diodes'.

Lieven: The TDA8924 looks very interesting! Cool that you can get 2 x 120W rms in an SMD package.....!
  Reply With Quote
Old 8th December 2003, 08:31 PM   #8
diyAudio Moderator Emeritus
 
roddyama's Avatar
 
Join Date: Jan 2002
Location: Michigan
Please excuse me if I'm out in left field on this not being a digital type person, but doesn't the designation "Class D" pertain specifically to the power supply providing the voltage rails and current for the output. The "amplifier" section itself is still analog isn't it? If that's true than it's misleading to compare A or A/B vs D. Class D amps will most likely have a Class A/B output stage.

This thread is talking about digital amplification:
A high-end digital amplifier for everyone
__________________
Rodd Yamashita
  Reply With Quote
Old 8th December 2003, 09:04 PM   #9
diyAudio Member
 
Join Date: Apr 2003
Location: Mars
Lars,
can you be more specific about getting 200W out from 55 supply?
This is really cool.
  Reply With Quote
Old 8th December 2003, 09:36 PM   #10
diyAudio Member
 
Join Date: Oct 2003
Location: The Lab
Lupulroz: Sure!

If you play music at a power level of say 200 Watts RMS (clipping level), the music does not contain (like sinewaves) a constant energy. So the amplifier does not put out 200 Watts of power all the time, only at the music's peaks.

You can measure the average energy content of different types of music, for instance by measuring the heat generated over a time period of 30 minutes of music, when dissapated in a closed thermal circuit, like a resistor in a waterbath.

I have performed experiments like tihis, and it turns out the average energy content is something like 30% of the maximum value, measured over 30 minutes. Depending somewhat on the type of music played of course.

Since a normal analog amplifier dissapates a fairly constant amount of power no matter the output power (from 30% to 100%) the benefit of the music's low energy content is un noticable. (If you take a 100W amplifier, it will dissapate 40W, at any output power from 30 to 100W).
However in a PWM amplifier it can be exploited. The PWM dissappates say 8W at zero power and 12W at max power. So the consumption from the transformer is output power + avg. 10W.
Since a well built toroid transformer can deliver much more power than specified, if it is in short periods, you can rely on full RMS power for minutes at a time. Playig music, you can go at clipping level for hours with the tiny transformer.

So hook a toroid up to a PWM amplifier, and you can play 100 Watts RMS at clipping level, only using a 30 VA transformer. I know it may sound crazy to some, but i have actually demonstrated this at a danish audio convention this last spring.
You may think the sound is flat or bass control is weak. But try it, you might be surprised!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1500W RMS Class D PCB - which Class D Driver Chip is it ? mosfetsound Class D 11 1st April 2011 12:17 PM
Can a Class AB PP amp be said to be operating in Class A at low signal levels? ray_moth Tubes / Valves 19 23rd January 2009 08:52 PM
How about a round-up of Class A kit power amps, or collectable vintage class A? Brisso57 Solid State 4 14th February 2007 11:30 AM


New To Site? Need Help?

All times are GMT. The time now is 06:06 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2