I have all the information about the 2-way crossover.
I need a 3-way crossover, in which other cutoff frequencies and additional filters are applied.
If you have a desire to help me, then please write to me.
vladimirtyagunov1953@gmail.com
I need a 3-way crossover, in which other cutoff frequencies and additional filters are applied.
If you have a desire to help me, then please write to me.
vladimirtyagunov1953@gmail.com
Seriously, it's not rocket surgery.
I've made several crossovers for various car component systems with no more than the basic info in their sales literature.
You know (or can measure) the drivers impedance.
You should be able to find the factory crossover points.
Only thing you need then is any attenuation for the mid and tweeter.
And that can be done by ear in 5 minutes.
All this should be doable in under a day.
Considering you've been bumping this post for 3 years I would've thought you'd at least try other options.
Lets face it, a car crossover isn't going to be even remotely accurate due to unknown positions, surfaces, etc.
I've made several crossovers for various car component systems with no more than the basic info in their sales literature.
You know (or can measure) the drivers impedance.
You should be able to find the factory crossover points.
Only thing you need then is any attenuation for the mid and tweeter.
And that can be done by ear in 5 minutes.
All this should be doable in under a day.
Considering you've been bumping this post for 3 years I would've thought you'd at least try other options.
Lets face it, a car crossover isn't going to be even remotely accurate due to unknown positions, surfaces, etc.
I agree with your words.I wanted to use this scheme as the basis for further refinement and selection of the details of the scheme.I can measure *.imp and ( soft SpeakerWorkShop ) *.frd ( soft ARTA ).
I do not understand the high frequency of the 650 Hz section between 650 and 430 at the recommended band for the midrange 200-7000 Hz
Here's my setup.
Need schematic for Dynaudio Esotar2 EX3-650
I now have active filters.In terms of building passive filters.
I do not understand the high frequency of the 650 Hz section between 650 and 430 at the recommended band for the midrange 200-7000 Hz
Here's my setup.
Need schematic for Dynaudio Esotar2 EX3-650
I now have active filters.In terms of building passive filters.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.