Hiphonics Zxi 1008 amp repairs almost completed

The customers original problem with this amp was that it had no sound on one of the two channels, after replacing various components in the amp section and the power supply section it turns out that all it was, was a bad crossover selector switch. The contacts had broken on the inside of the switch. Sourcing this switch is a problem because most companies carry it but you have to buy like 100 or more at $.40/ea. Did find that I can get one from Mouser electronics next month. So in the mean time for testing purposes I hard wired the contacts in the switch together with solder until I can get a new switch.

Stay tuned....