3 way post #3 - the circuit boards - diyAudio
Go Back   Home > Forums > Blogs > Rob's active 3way with transconductance chipamps build blog

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
My build blog for my active 3 ways.
Rate this Entry

3 way post #3 - the circuit boards

Posted 9th November 2009 at 10:20 PM by relder
Updated 9th November 2009 at 10:28 PM by relder (Update title)

Here are two of the assembled boards. A mono one for the woofer on the left and a stereo on the right for mid and tweet. I designed the PCB to do both.

Originally I did two in point-2-point, which I found tedious, especially for the LM4780 which has tiny pins with little room for error. And after I blew up the LM4780 board (I hooked up the power supply backwards - poof!) I decided to go PCB, since there was no way to replace the chip given how close the pins were to each other.

The ExpressPCB software is pretty easy to use. Eagle, for how often I attempt PCB's, had too many annoyances for me when creating new objects, etc. The service is pretty quick too, ordered on a Tues and received them on a Fri. They give you 3 boards in their low cost service - so I'll use the one P2P LM3886 and 3 PCB boards.
Attached Thumbnails
Click image for larger version

Name:	AssembledBoards.jpg
Views:	1220
Size:	128.9 KB
ID:	32  
Posted in 3 Way
Views 365 Comments 0 Email Blog Entry
Total Comments 0


Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 11:14 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2