Free pcb's from me - diyAudio
Go Back   Home > Forums > Blogs > peranders

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Free pcb's from me

Posted 10th February 2010 at 08:34 PM by peranders
Updated 22nd October 2011 at 01:36 PM by peranders

diyaudio.com is a good place and this is my effort to raise money for the service.

I'm offering 4 pcs. of totally free pcb's of my diamond buffer SSB01 to all donating diyaudio members will get this without any charge.

Contact me via email from diyaudio (this is important) since then I can easily see that your are a member and I can also check if you have donated. Don't forget to write down your address also. Please write it so I can cut it out and put on the envelope.

Please notice that the pcb's requires two small patches (wires) and the version of the pcb is revision 0, red pcb's.

Schematics, pcb layout
BOM


The 25 first gets 4 pcs. of my SSB01 for free, even the shipping
1 Luke, shipped 2010-02-12
2 Boilermakerfan, shipped 2010-02-12
3 tcpoint, shipped 2010-02-12
4 khaho, shipped 2010-02-12
5 HiljaisuudenMeri, shipped 2010-02-12
6 Ed LaFontaine, shipped 2010-02-15
7 nelsonvandal, shipped 2010-02-18
8 nikongod, shipped 2010-02-18
9 vixr, shipped 2010-02-19
10 TheSeekerr, shipped 2010-02-19
11 qusp, shipped 2010-03-24
12 mhamel, shipped 2010-02-22
13 sandbasser, shipped 2010-02-22
14 supertrioe, shipped 2010-03-04
15 aleka, shipped 2010-03-18
16 pidesd, shipped 2010-03-18
17 thanh1973, shipped 2010-03-24
18 panson_hk, shipped 2010-03-25
19 hemling, shipped 2010-03-25
20 alopa, shipped 2010-04-06
21 Audiofanatic, shipped 2010-04-07
22 grenert, shipped 2010-04-09
23 akira, shipped 2010-04-19
24 satoru, shipped 2010-04-24
25 steven2992, shipped 2010-05-07
Posted in Uncategorized
Views 5045 Comments 15 Email Blog Entry
Total Comments 15

Comments

  1. Old Comment
    SY's Avatar
    This looked perfect to try in my gyrator-based tube crossover until I saw that it was SMD. After struggling with a very simple SMD build, I realized that part of my fascination with tubes probably comes from being actually able to see and manipulate the parts using my 55 year old eyes and hands. If only I had a compliant teenage child who would assemble this stuff for me... ;-)
    permalink
    Posted 11th February 2010 at 10:28 AM by SY SY is offline
  2. Old Comment
    permalink
    Posted 12th February 2010 at 05:55 AM by peranders peranders is offline
  3. Old Comment
    BoilermakerFan's Avatar
    Awesome! Thanks peranders!
    permalink
    Posted 13th February 2010 at 03:24 AM by BoilermakerFan BoilermakerFan is offline
  4. Old Comment
    vixr's Avatar
    wow...thank you sir.
    permalink
    Posted 20th February 2010 at 12:39 AM by vixr vixr is offline
  5. Old Comment
    sandbasser's Avatar
    What an extremely generous offer. Thanks!!!

    (By the way - the BOM link doesn't seem to work.)
    permalink
    Posted 20th February 2010 at 12:30 PM by sandbasser sandbasser is offline
  6. Old Comment
    peranders's Avatar
    The link is fixed.
    permalink
    Posted 21st February 2010 at 06:32 PM by peranders peranders is offline
  7. Old Comment
    sandbasser's Avatar
    Hmmm - Looks like I'm "lucky number 13" - LOL
    permalink
    Posted 21st February 2010 at 09:12 PM by sandbasser sandbasser is offline
  8. Old Comment
    BoilermakerFan's Avatar
    Received! Thanks again. Buying a techFX Reflow contoller now to mod a toaster oven. :-)
    permalink
    Posted 26th February 2010 at 09:07 PM by BoilermakerFan BoilermakerFan is offline
  9. Old Comment
    vixr's Avatar
    I received mine today. They are so tiny! Thank you for the kind gift of these buffers. I cant wait to build them...
    I ordered my parts from Digikey and Newark, it was not too hard to find the stuff from the BOM at vendors in the USA
    permalink
    Posted 27th February 2010 at 10:57 PM by vixr vixr is offline
    Updated 1st March 2010 at 01:02 AM by vixr
  10. Old Comment
    wintermute's Avatar
    Very generous offer Peranders!! I'm currently working on doing a B1 based crossover / preamp so I'm not in the market for a buffer circuit otherwise I'd have taken you up on the offer. I'll leave them for someone who will be more likely to use them
    permalink
    Posted 5th March 2010 at 12:31 PM by wintermute wintermute is offline
  11. Old Comment
    Arrived today.
    They are made with excellence.
    Thanks again.
    permalink
    Posted 11th March 2010 at 11:06 PM by supertrioe supertrioe is offline
  12. Old Comment
    I would like to be added to the lucky list.

    Thanks
    Peranders
    permalink
    Posted 24th March 2010 at 02:58 AM by Melon Head Melon Head is offline
  13. Old Comment
    panson_hk's Avatar
    I received the boards. Thanks a lot peranders!
    permalink
    Posted 30th March 2010 at 03:10 PM by panson_hk panson_hk is offline
  14. Old Comment
    The boards arrived. Thank you so much!!
    permalink
    Posted 30th April 2010 at 12:41 AM by satoru satoru is offline
  15. Old Comment
    peranders's Avatar
    Any buffers in real duty?
    permalink
    Posted 29th December 2010 at 09:54 AM by peranders peranders is offline
 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 03:43 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2