 |
Posted 11th May 2016 at 05:36 PM by oltos
Hello SY,
I have one First Watt F4 amp, so I’d be running it stereo unbalanced to drive my speakers.
Since the Impasse debuted, have you or others implemented any revisions that I should know about?
My speakers are at least 94db sensitive, my room is 16 ft x 14 and my ears can’t tolerate average SPLs much beyond ~ 60db-at least not much above the lower midrange band (i.e. allowing for the Fletcher-Munson effect). My midwoofers are cut off below 70Hz, where my pair of Rythmik 12" sealed powered subs take over.
Except for the subwoofers, my speaker system is a clone of Gary Dahl’s Azurahorn 425/Radian 745 Neo Be/GPA Altec 416 system.
https://www.diyaudio.com/forums/multi-way/100392-beyond-ariel-720.html
Are there certain tube suppliers of specific brands of 6SN7 tubes, or better sounding alternatives, that you would recommend for best performance with my speakers, such as https://www.sophiaelectric.com/ ?
...
|
diyAudio Member
|
|
Views 633
Comments 0
|
Blog Categories
Local Categories