Hi!
Would anyone be interested in a trade? My kids' new kitten decided to drag my tonearm across the platter and rip my stylus out! Anyway I have to replace the cartridge and I figured I'd try this before I ran out and bought a new one. No, I'm not looking for some top end cartridge, just something decent.
I'll trade a pair of these
and a pair of these
the tweets are new bulk and the mids are nice - but appear to have been mounted. The actual part # is W4-1052SA. No factory packaging on any.
Grados need not apply, I have a rega. Lemme know if it works for you!
Would anyone be interested in a trade? My kids' new kitten decided to drag my tonearm across the platter and rip my stylus out! Anyway I have to replace the cartridge and I figured I'd try this before I ran out and bought a new one. No, I'm not looking for some top end cartridge, just something decent.
I'll trade a pair of these
and a pair of these
the tweets are new bulk and the mids are nice - but appear to have been mounted. The actual part # is W4-1052SA. No factory packaging on any.
Grados need not apply, I have a rega. Lemme know if it works for you!
Geez I know of no plans...
I would imagine there would be good support here on the mid - it's pretty popular and has a solid following. The tweet seems a good match too, slightly more sensitive. Both are '4 ohm' drivers and both don't affect my CRT screen. I'd use them but I'm into much bigger stuff right now....
edit:
he he, you hated it that much, huh?
I would imagine there would be good support here on the mid - it's pretty popular and has a solid following. The tweet seems a good match too, slightly more sensitive. Both are '4 ohm' drivers and both don't affect my CRT screen. I'd use them but I'm into much bigger stuff right now....
edit:
a grand total of 1 hour on it.
he he, you hated it that much, huh?
mpmarino said:Grados need not apply, I have a rega. Lemme know if it works for you!
My Rega doesn't mind Grados (and when i was selling Regas new, a Grado was a pretty standard install) ... i'll see if i have anything else.
dave
mpmarino said:WOW Dave, My NAD/rega hums a lot w/grado!
I sold an awful lot of NAD 3020/7020, Rega 2/Grace 707/Grado + speakers of your choice (Advents, Bostons, LS3/5A, KEF... ) and it was never a problem.
You should check for wiring problems.
dave
I've 'run the gamut'!
I even removed the arm and used it as a wand. The hum is a result of proximity to the motor. Definitely radiated. Maybe the motor has an issue ... dunno?
The tt has a Linn Basik plus mounted.
The cartridge that I just 'broke' was a grado black. In terms of grado I won't go higher than the blue (pricewise and risk) and the blue is just a better black. I'd certainly like to try something else....
I even removed the arm and used it as a wand. The hum is a result of proximity to the motor. Definitely radiated. Maybe the motor has an issue ... dunno?
The tt has a Linn Basik plus mounted.
The cartridge that I just 'broke' was a grado black. In terms of grado I won't go higher than the blue (pricewise and risk) and the blue is just a better black. I'd certainly like to try something else....
mpmarino said:The tt has a Linn Basik plus mounted.
Same as mine... i'd be using one of my black grados (probably an F1+ if someone hadn't gifted me a Garrott P77 (swaps/trade/bribes have kept the table to $100 expenditure so far and i'd be able to recoup that if i could find the Jelso that was originally on it.
At some point i'm going to rebuild it to accomodate 2 arms (have a nice S-arm off a high faluting Technics TT) attachment is now (i do need to dust it)
dave
Attachments
mpmarino said:
he he, you hated it that much, huh?
It's actually not that bad of a cartridge, I bought it so I could test the turntables I've been rebuilding. It's been mounted 3 or 4 times and ran for a track or two then taken back off.
Before I sell a deck, I usually speak with the buyer about what cartridge they'd like mounted, and after I tell them how much a cartridge is going to cost them for their $100 deck...
well... they choose the grado black almost everytime (It's the cheapest cart that I'll let them choose)
wait: my father in law preferred the oyster over the black. so, that's one sold.
mpmarino said:Well, I'd be willing to try the Sumiko.....
I could play it on my deck over the phone.
mpmarino said:hehe if it was a dynavector or something you could tease me, but not this time
Yes or no?
and I'll throw in a couple extra dollars to defray your higher shipping costs.
see yer pm's
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.