Depending on if there's enough space on the back plate, a PWR-ICE125 or 250 ought to fit the bill. It isn't air tight, so needs it's own enclosure inside, though.
https://www.minidsp.com/products/plate-amplifiers/pwr-ice125
Johan-Kr
https://www.minidsp.com/products/plate-amplifiers/pwr-ice125
Johan-Kr
You're using a horn driver for the tweeter, so you might want to take a look at the Hypex UcD32MP that Hypex is selling the last of stocks for. You'll need to make a cabinet and do a little assembly.
These modules go for €50, including PSU for a 2x30W module. You'll need a regulator and an unbalanced to balanced input buffer (from Ebay) for it.
Then you can add two UcD180 modules and a SMPS400A180 for the woofers. Use Neutrik Speakon plugs on the amp and speakers, so you do everything in one caple - saves you from connection mistakes if you move stuff around...
Johan-Kr
These modules go for €50, including PSU for a 2x30W module. You'll need a regulator and an unbalanced to balanced input buffer (from Ebay) for it.
Then you can add two UcD180 modules and a SMPS400A180 for the woofers. Use Neutrik Speakon plugs on the amp and speakers, so you do everything in one caple - saves you from connection mistakes if you move stuff around...
Johan-Kr
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.