hi
im planning to build a multichannel pre-amp and I'm looking for a optical rotary encoder, it is not important if it is new or second-hand as long it is in perfect working condition.
since i don't have creditcard or paypal, im trading my pair of lm3875 gainclone kit, or some of my devices, i have(12pcs of opa627BP, 9pcs opa637, 2pcs PIC16f877 and 2pcs PIC16f84.
im also looking for other devices that you think i can use for my project (LCD/VFD, connectors, etc)
Please make an offer, thanks for looking....
im planning to build a multichannel pre-amp and I'm looking for a optical rotary encoder, it is not important if it is new or second-hand as long it is in perfect working condition.
since i don't have creditcard or paypal, im trading my pair of lm3875 gainclone kit, or some of my devices, i have(12pcs of opa627BP, 9pcs opa637, 2pcs PIC16f877 and 2pcs PIC16f84.
im also looking for other devices that you think i can use for my project (LCD/VFD, connectors, etc)
Please make an offer, thanks for looking....
Attachments
Look what I have found
Sticker is a little scratchy but device is ok. shaft diameter is 3,14mm, attached cable about 50cm long, foutr holes for mounting with screws. M2,5 or M3, did not try.
100 pulses per turn per channels A & B and one per turn, channel C.
Supply 12V gives cmos compatible signal 4V high level.
I look for PCM52 ceramic dip and DAC71-CSB or COB ceramic dip.
But as you probably may not have any of those I might be interested in any interesting DAC chips or OPA627, make me an offer.
Sticker is a little scratchy but device is ok. shaft diameter is 3,14mm, attached cable about 50cm long, foutr holes for mounting with screws. M2,5 or M3, did not try.
100 pulses per turn per channels A & B and one per turn, channel C.
Supply 12V gives cmos compatible signal 4V high level.
I look for PCM52 ceramic dip and DAC71-CSB or COB ceramic dip.
But as you probably may not have any of those I might be interested in any interesting DAC chips or OPA627, make me an offer.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.