The last of my clearout:
--------------------------------------------------------------------------
2 x Seas L22-RNX4/P 8.5" Bass drivers
Superb drivers for the money with great definition and clarity.
Originally cost me £67 each about 6 months old with around 150hours use, very carefully looked after from new and in absolutely perfect condition. Come supplied with original reciept.
Data Sheet on Drivers:
http://www.seas.no/seas_line/woofers/H1208.pdf
£65 for the pair
----------------------------------------------------------------------
Krell KSA50 mkII PCB's
Due to the dropping through of a sale my Krell PCB's are back up. Please note if you are overseas I will NOT accept a postal order since this has caused me much grief in the last couple of days!
These are the same boards as per the groupbuy in the 'Krell KSA50 PCB' thread over in the Solid State.
Designed by Pinkmouse (Al) and manufacturer by Advance over in the US. Stunning quality with double sided, solder mask, silk screen and scoring for easy seperation of driver and output boards.
Each board will do a single channel of amplification and since there are 4 boards here that a potential of 4 channels.
I'm looking to recover only my expenses for these boards and I am NOT making any profit on these. I have little time these days and I'm already comfortable with my ESP P101 amps that I was going to replace with the Krells.
Here's a couple of shots of Still4Given's boards with components mounted (Scroll down to bottom of page):
http://www.diyaudio.com/forums/show...5846#post725846
By all accounts from folks who have already built the boards, reports are very good on the sound quality - hardly surprising since this is a Krell!
Bill of Materials(BOM) will be supplied with the boards and the boards are silkscreened with component locations relating to the details within the BOM. Also there is a wealth of advice over in the thread linked to above, so I'm sure someone would help out if you get stuck.
Price per PCB(1 channel) is £15 with a total of 4 available
Email: zeroex_15@hotmail . com
--------------------------------------------------------------------------
2 x Seas L22-RNX4/P 8.5" Bass drivers
An externally hosted image should be here but it was not working when we last tested it.
Superb drivers for the money with great definition and clarity.
Originally cost me £67 each about 6 months old with around 150hours use, very carefully looked after from new and in absolutely perfect condition. Come supplied with original reciept.
Data Sheet on Drivers:
http://www.seas.no/seas_line/woofers/H1208.pdf
£65 for the pair
----------------------------------------------------------------------
Krell KSA50 mkII PCB's
Due to the dropping through of a sale my Krell PCB's are back up. Please note if you are overseas I will NOT accept a postal order since this has caused me much grief in the last couple of days!
An externally hosted image should be here but it was not working when we last tested it.
These are the same boards as per the groupbuy in the 'Krell KSA50 PCB' thread over in the Solid State.
Designed by Pinkmouse (Al) and manufacturer by Advance over in the US. Stunning quality with double sided, solder mask, silk screen and scoring for easy seperation of driver and output boards.
Each board will do a single channel of amplification and since there are 4 boards here that a potential of 4 channels.
I'm looking to recover only my expenses for these boards and I am NOT making any profit on these. I have little time these days and I'm already comfortable with my ESP P101 amps that I was going to replace with the Krells.
Here's a couple of shots of Still4Given's boards with components mounted (Scroll down to bottom of page):
http://www.diyaudio.com/forums/show...5846#post725846
By all accounts from folks who have already built the boards, reports are very good on the sound quality - hardly surprising since this is a Krell!
Bill of Materials(BOM) will be supplied with the boards and the boards are silkscreened with component locations relating to the details within the BOM. Also there is a wealth of advice over in the thread linked to above, so I'm sure someone would help out if you get stuck.
Price per PCB(1 channel) is £15 with a total of 4 available
Email: zeroex_15@hotmail . com
nicoch46 said:hello, i interested a pair seas, accept paypal ?
manu
Sorry but I won't post the Seas drivers overseas since it would cost a small fortune.
nicoch46 said:I live in italy....
What's with the Jamaican flag
I'm still not sure just how much to post to Italy though. The package will be around 7kg.
Gavinator68 said:how many of the PCB's are left?
Cheers
I was expecting payment from a chap in the UK for two boards last week but it looks like he's not interested because nothing has been done about it.
So I've got 4 boards back up for sale.
sqlkev said:Woud you consider shipping the seas drivers to the US? any idea how much it'd cost?
i really want the krell pcbs too, but not sure if i'm up for the task.
Would ship to the US but its going to be US$130-40 in total for the drivers inc shipping.
sqlkev said:Would you please check with the post office?
if it's US 130, i'll definitely take it.
and now the Krell pcbs, should i try to attempt the briangt lm4780 kits first before thinking of another amp project?
BTW, my zipcode is CA 92704, thought u'd need that for an estimate
Scrap that $130, its $175 for economy 28-30 days or $205 for 5-8 days.
Postage is more than the drivers
ShinOBIWAN said:
Scrap that $130, its $175 for economy 28-30 days or $205 for 5-8 days.
Postage is more than the drivers
holy cow,
good idea on not shipping the drivers across continents
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.