I picked up a Trygon RS60-7.5 on ebay (as-is) and am trying to get it working.
I powered it up on a Variac and the output seems to track the input. I am getting 60V out with 60V in. In addition, with the Variac set at ~35V, the outputs swings back and forth between 20V and 30V.
Step 1 - replace all the caps, including the oil can that's in there?
I have a block diagram of the circuit, but no schematic. Any thoughts on where to start?
Thanks!
Scott...
I powered it up on a Variac and the output seems to track the input. I am getting 60V out with 60V in. In addition, with the Variac set at ~35V, the outputs swings back and forth between 20V and 30V.
Step 1 - replace all the caps, including the oil can that's in there?
I have a block diagram of the circuit, but no schematic. Any thoughts on where to start?
Thanks!
Scott...