I have been planning my ESL project and have wondered what is the maximum bandwidth one should consider for the matching xfomers.
I am thinking of building a LM3886 or 4780 based amp for each LF,HF transformer. Xover, phase and amplitude will be controled at the amps input. ESL panel will be a large area full range.
Dynamic driver for sub.
Looking at the MK121 interface schematic it appears the two bands overlap. There has to be a better way of doing this.
Just tossing around ideas at this point.
I am thinking of building a LM3886 or 4780 based amp for each LF,HF transformer. Xover, phase and amplitude will be controled at the amps input. ESL panel will be a large area full range.
Dynamic driver for sub.
Looking at the MK121 interface schematic it appears the two bands overlap. There has to be a better way of doing this.
Just tossing around ideas at this point.
Hi,
here you can see, how the Acoustat transformers work:
http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=EP0057215&F=0&QPN=EP0057215
Regards, Frank
here you can see, how the Acoustat transformers work:
http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=EP0057215&F=0&QPN=EP0057215
Regards, Frank
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.