Gentlemen, it's PAYPAL time ...
Gentlemen, TO-3 SYMASYM friends,
I invited an offer for the PCBs from the etching company and consolidated your orders.
Here we are:
http://www.abload.de/img/paypal_time0oli.png
I will offer you:
I am sorry that I cannot offer you the Soft-Power-On PCB for a lower price, but this PCB has to be "tooled" , since it is
a "new" PCB and the order-quantity is rather small.
The prices for shipping are well-known.
Shipping within Germany is: 55 Cent for a standard letter, 1.45€ for a big letter and 2.20€ for a MAXI-letter.
Shipping to outside of Germany is 3.45€ .
The price for the coated letter itself is 40 Cent.
I do not yet know how to transfer the PCBs to those of you who ordered for more than 100€.
As an insured MAXI-Letter ("Einschreiben"), as a parcel? Tell me, how I shall do it.
I told you that a parcel (worth > 200€) got lost in the German group-buy last month, and I wonder if German Bundespost will pay the price.
I would like very much that the 4 of you who ordered for more than 100€ ask me for my bank account (via PM).
You know: PAYPAL will request 4% of the transferred money for themselves.
The others can transfer the money to my PAYPAL - ID: RRozek@t-online.de
When you transfer the money (either via PAYPAL or to my bank-account):
Please leave your Forum's nickname and your EMail- and Home-address in the transfer - data field, so I know, from whom I received the money,
where to send your order and where to send the "TO-3 SYMASYM Builder's Manual" (written in GERMAN) and other useful information.
Do you have any questions?
Did I make an error concerning your order? Please tell me if I did.
I am looking forward to your money - transfer.
It is PAYPAL - time now, gentlemen.
Best regards - Rudi_Ratlos
Gentlemen, TO-3 SYMASYM friends,
I invited an offer for the PCBs from the etching company and consolidated your orders.
Here we are:
http://www.abload.de/img/paypal_time0oli.png
I will offer you:
- the TO-3 SYMASYM PCB for 8€
- the PSU PCB for 4€
- the LS-Prot PCB for 4€
- the Soft-Power-On PCB for 8€
I am sorry that I cannot offer you the Soft-Power-On PCB for a lower price, but this PCB has to be "tooled" , since it is
a "new" PCB and the order-quantity is rather small.
The prices for shipping are well-known.
Shipping within Germany is: 55 Cent for a standard letter, 1.45€ for a big letter and 2.20€ for a MAXI-letter.
Shipping to outside of Germany is 3.45€ .
The price for the coated letter itself is 40 Cent.
I do not yet know how to transfer the PCBs to those of you who ordered for more than 100€.
As an insured MAXI-Letter ("Einschreiben"), as a parcel? Tell me, how I shall do it.
I told you that a parcel (worth > 200€) got lost in the German group-buy last month, and I wonder if German Bundespost will pay the price.
I would like very much that the 4 of you who ordered for more than 100€ ask me for my bank account (via PM).
You know: PAYPAL will request 4% of the transferred money for themselves.
The others can transfer the money to my PAYPAL - ID: RRozek@t-online.de
When you transfer the money (either via PAYPAL or to my bank-account):
Please leave your Forum's nickname and your EMail- and Home-address in the transfer - data field, so I know, from whom I received the money,
where to send your order and where to send the "TO-3 SYMASYM Builder's Manual" (written in GERMAN) and other useful information.
Do you have any questions?
Did I make an error concerning your order? Please tell me if I did.
I am looking forward to your money - transfer.
It is PAYPAL - time now, gentlemen.
Best regards - Rudi_Ratlos
Gentlemen,
thanks to those of you who have already payed via PAYPAL (marked "green").
http://www.abload.de/img/image1kre4.png
This is the status of my own build (remember: I am using the PCB Version 1 that requires an extra heatsink for the drivers):
http://www.abload.de/img/joe005npol.jpg
Both channels are adjusted and work.
I adjusted the quiescent current / bias, so that 13 mV drops over a 0R22 emitter resistor, resulting in about 60 mA flowing through a TO-3 transistor.
The value of the trim-potentiometer R17 is 150 Ohm in my build; I use a 45 Ohm resistor R23 to couple the drivers.
There is still a lot to do: I have to solder the second LS Protect PCB, the Soft-Power-On (allthough not needed), the source-selector, volume attenuator, display, ...
Best regards - Rudi_Ratlos
thanks to those of you who have already payed via PAYPAL (marked "green").
http://www.abload.de/img/image1kre4.png
This is the status of my own build (remember: I am using the PCB Version 1 that requires an extra heatsink for the drivers):
http://www.abload.de/img/joe005npol.jpg
Both channels are adjusted and work.
I adjusted the quiescent current / bias, so that 13 mV drops over a 0R22 emitter resistor, resulting in about 60 mA flowing through a TO-3 transistor.
The value of the trim-potentiometer R17 is 150 Ohm in my build; I use a 45 Ohm resistor R23 to couple the drivers.
There is still a lot to do: I have to solder the second LS Protect PCB, the Soft-Power-On (allthough not needed), the source-selector, volume attenuator, display, ...
Best regards - Rudi_Ratlos
@ German TO-3 SYMASYM DIYers:
LEATHERFACE just informed me that an "insured letter" ("eingeschriebener MAXI-Brief") is insured up to a value of 25€ only!
This is a NOGO!
I will therefore send the PCBs to all of you who want as a package ("Paket"). A package is insured up to a value of 500€!
The price for the shipment as a package is 4.90€ (4.10€ shipping cost + 80 Cent for the package itself).
I will inform SASCHA, who will do the shipping, about this decision.
Best regards - Rudi_Ratlos
LEATHERFACE just informed me that an "insured letter" ("eingeschriebener MAXI-Brief") is insured up to a value of 25€ only!
This is a NOGO!
I will therefore send the PCBs to all of you who want as a package ("Paket"). A package is insured up to a value of 500€!
The price for the shipment as a package is 4.90€ (4.10€ shipping cost + 80 Cent for the package itself).
I will inform SASCHA, who will do the shipping, about this decision.
Best regards - Rudi_Ratlos
Hi,
just found this great thread, do I have the chance to get in? I know I'm late, but perhaps I'm lucky.
I would like to order 'a stereo set' (two of every PCB) for 48€ + shipping.
But something I have to say: Great work! Very, very nice layout!
Greetings from Hamburg,
George
just found this great thread, do I have the chance to get in? I know I'm late, but perhaps I'm lucky.
I would like to order 'a stereo set' (two of every PCB) for 48€ + shipping.
But something I have to say: Great work! Very, very nice layout!
Greetings from Hamburg,
George
Gentlemen,
thank you your PAYPAL transfers!
This is the current status:
http://www.abload.de/img/12.09ewyr.png
If you do not mind, I will wait until the weekend to collect PAYPAL transfers.
Best regards - Rudi_Ratlos
P.S. I am a rich man now and have already booked a ticket to Las Vegas.
thank you your PAYPAL transfers!
This is the current status:
http://www.abload.de/img/12.09ewyr.png
If you do not mind, I will wait until the weekend to collect PAYPAL transfers.
Best regards - Rudi_Ratlos
P.S. I am a rich man now and have already booked a ticket to Las Vegas.
Hi Rudi,
I understand why you want to wait a couple of days before you issue the P.O.
Money transfer will usually take at least one day, maybe more because of bank-arrangements.
I paid through PqayPal 4 hours ago, and the payment will not show on your account before tomorrow.
Thanks for your efforts.
Steen
I understand why you want to wait a couple of days before you issue the P.O.
Money transfer will usually take at least one day, maybe more because of bank-arrangements.
I paid through PqayPal 4 hours ago, and the payment will not show on your account before tomorrow.
Thanks for your efforts.
Steen
Gentlemen,
this is the current status of payments received:
http://www.abload.de/img/status_14_09frdb.png
I will now write an EMail to all of those who forgot to pay and will set the deadline for payment to Sunday, 18th of September.
I will order the PCBs on Monday, 19th, then.
In the meantime I will add the explanation, schematics and BoM of the "Soft-Power-On" - PCB to the "TO-3 SYMASYM Builder's Manual".
I will send you the manual on the weekend.
Best regards - Rudi_Ratlos
this is the current status of payments received:
http://www.abload.de/img/status_14_09frdb.png
I will now write an EMail to all of those who forgot to pay and will set the deadline for payment to Sunday, 18th of September.
I will order the PCBs on Monday, 19th, then.
In the meantime I will add the explanation, schematics and BoM of the "Soft-Power-On" - PCB to the "TO-3 SYMASYM Builder's Manual".
I will send you the manual on the weekend.
Best regards - Rudi_Ratlos
- Home
- Group Buys
- TO-3 SYMASYM