Tapped horn for Beyma 12b/100r. Help.

[matsj]

I have 2 Beyma 12b/100r laying and i want to make a sub of them. Can someone help me with hornresp to make a tapped horn for them ?

Mats

 

[epa]

is this for ht or music?
btw some ts parameters would be helpful

 

[matsj]

Here are some parameters: http://profesional.beyma.com/pdf/12B100-RE.pdf

I need a sub for both ht and music.

mats

 

[epa]

i simmed a ~250 liter cab with 96 db @1pi@2.83v,f3 20 hz.
dont know how low jou want to go but 20 hz f3 looks a good compromise fot ht and music.
nice speaker btw

 

[bjorno]

Here are some parameters: http://profesional.beyma.com/pdf/12B100-RE.pdf

I need a sub for both ht and music.

mats

Parameters put into HR==> T-TQWT using 2 drivers:

b

 

[m R g S r]

20hz good compromise for HT and music? Isn't that pretty much a HT sub?

 

[Djim]

Watch it guys, the 12B100/R has a very limiting Xmax that is not practical for <35Hz use...
If you want to go below that use the 15B100/R (both are JBL copies btw).

 

[matsj]

I know that they not are any monster, but for a small ht it's better than a small Jamo sub.

I'm not sure jbl copied beyma, i think beyma produced some of jbl's driver.

THank you epa and bjorno!

Mats

 

[bjorno]

..I know that they not are any monster, but for a small ht it's better than a small Jamo sub..

Hi Mats,

Agree, Here is another well thought trough design using the Beyma 12B100RE driver that is IME easy to fold:

Like the T-TQWT this OD-QWP is IMO loud enough for use in a normal domestic room.

When placed near a corner the in-band SPL would exceed 120 dB with a margin.

b