I have a totally rad switch I want to use for phantom power in a mic preamp circuit.
This is what the stats say about its rating:
Power level: 1A @ 125/250VAC or 1A @ 30VDC
it also says:
Logic level: 0.4VA maximum @ 28V AC/DC maximum (applicable range 0.1mA ~ 0.1A @ 20mV ~ 28V)
I wanna know:
If I put 48VDC @ 100mA through this thing will it melt?
Thanks,
~Dave
This is what the stats say about its rating:
Power level: 1A @ 125/250VAC or 1A @ 30VDC
it also says:
Logic level: 0.4VA maximum @ 28V AC/DC maximum (applicable range 0.1mA ~ 0.1A @ 20mV ~ 28V)
I wanna know:
If I put 48VDC @ 100mA through this thing will it melt?
Thanks,
~Dave