• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Svetlana SV572-10 ???

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
ICARE said:
Hello

I want a build a SE tube amplifier for my speakers Audio-Note AN-AZ Three 94 dB.
Somebody know this tube ?, any information etc..etc...will be great.

What do you think of the shema of Eric Barvour ?

Thanks in advance.
J-Y

Do you think than 8W will be enough

Hello “Icare”,

I like to know, have you, in the mean time, already build this SE SV572-10 amp.?
And… what are the results?

Dogie
 
SE SV572-10

The SV572-10 in steat of the SV811-10

Regarding SE-output:
#1. 1 SV811-10 is about 2 2A3 in PSE
#2. 1 SV572-10 is about 1 300B in SE

Summary:
# I: prefer SE above PSE
# 2: A 300B is more expensive than a SV572-10. Tonal, the 300B is superior, but a SV572-10 is not bad dht (with Ra 6K).

Most of the speakers prefer 10 Watts ore more; with a Ub of 500V. and higher , the SV572-10 delivers more than 10W., and has so some benefits regarding the 300B.
And the 6EM7/6EA7 is a very good driver/input-stage.

Dogie

(Missing the "edit"-possibility at this nice forum ;)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.