You have to see the official interview with me from this years Roskilde then.
(Note: in Danish but subtitled in English)
Roskilde Festival: TV
Cool !
You Danes are ****%$g crazy !
Yes ALL car audio based "COMPONENT" systems include crossovers. Why do you want 5 speakers??? You don't need that. Watch this video: Ghetto Case - YouTube
JOhn...The cadence kit includes crossovers? Is that what you are saying?
So..I have the 5 speakers...if I get this amp...will it run 5? And also, where can I get the correct crossover? Thanks man.
JC
A crossover for 5 speakers is going to cost you upwards of at least $50. And you are going to need one amp for your stereo main channels and another monoblock amp for your infamous "5th speaker" which I suspect is a 10 inch woofer. Your system is highly inefficient.
Ok...If i use the 4 speakers I have...drop the sub. 3 questions.
1). Do I need crossovers? Can you suggest one?
2). Will this be loud enough.
3). The battery you suggested is able to recharge?
Thanks J!
JC
1) Crossover included in the component kit as already stated 3 times before.
2) Impossible to answer what is loud enough
3) Any SLA can be recharged
Those are a great deal too. I would have to compare them side by side.
So far I am blown away by the CWM-6KIT. Great build quality for under $60.
Hi,
I agree you get a lot for your money, but I don't like the look of the c/o's.
The other kit appears to have more money spent on the c/o's and less
on the drivers, IMO a far better bet. Apparent value isn't always.
I'd say you need a measuring set up for the CWM-6Kit and c/o rework.
rgds, sreten.
Here is my final suggestion:
Get two of these: Crossover 3-Way 8 Ohm 800/5,000 Hz 100W
And order the AMP6 : 41Hz Audio:AMP6-BASIC Assembled
Good Luck.
Get two of these: Crossover 3-Way 8 Ohm 800/5,000 Hz 100W
And order the AMP6 : 41Hz Audio:AMP6-BASIC Assembled
Good Luck.
And that componentry will allow me to use what I have? One set of speakers are 4ohm.
Here is what I will order:
1... 2 way crossover. 8 0hm
1 crossover for a 4ohm.
1 amp6 basic assembled (this will run 5 speakers?)
1 battery--that you listed.
1 charger that you listed.
Is this correct?
Thanks John...I am sure this is beyond annoying for you. I appreciate it.
Here is what I will order:
1... 2 way crossover. 8 0hm
1 crossover for a 4ohm.
1 amp6 basic assembled (this will run 5 speakers?)
1 battery--that you listed.
1 charger that you listed.
Is this correct?
Thanks John...I am sure this is beyond annoying for you. I appreciate it.
Hi,
I agree you get a lot for your money, but I don't like the look of the c/o's.
The other kit appears to have more money spent on the c/o's and less
on the drivers, IMO a far better bet. Apparent value isn't always.
I'd say you need a measuring set up for the CWM-6Kit and c/o rework.
rgds, sreten.
I ordered a pair. WTF. Let's see. I am sure they will sound great in my future boombox project. Project Featherweight. Originally designed as a 2.1 system. Let's see what the weight comparison (two lightweight woofers VS one DVC large magnet woofer) turns out in the end.
JV
And that componentry will allow me to use what I have? One set of speakers are 4ohm.
Here is what I will order:
1... 2 way crossover. 8 0hm
1 crossover for a 4ohm.
1 amp6 basic assembled (this will run 5 speakers?)
1 battery--that you listed.
1 charger that you listed.
Is this correct?
Thanks John...I am sure this is beyond annoying for you. I appreciate it.
Here is what I will order:
1... 2 way crossover. 8 0hm
1 crossover for a 4ohm.
1 amp6 basic assembled (this will run 5 speakers?)
1 battery--that you listed.
1 charger that you listed.
Is this correct?
Thanks John...I am sure this is beyond annoying for you. I appreciate it.
Ok...If i use the 4 speakers I have...drop the sub.
JC
Hi,
Not a chance if the 4 speakers you have are the ones listed earlier.
This thread is all over the place due to very lazy questions.
Generally utterly clueless and nowhere near a good solution.
rgds, sreten.
Last edited:
Hi,
Its not clear what parts you currently have if any. Its not clear for what purpose.
I'd say take a deep breath and start again. What battery life do you want ?
What sort of volume do you want ? What sort of bass capability do you want ?
What sort of form factor do you want ? What is the thing actually for ?
For the last you cannot describe it by suggesting something is the answer.
rgds, sreten.
Its not clear what parts you currently have if any. Its not clear for what purpose.
I'd say take a deep breath and start again. What battery life do you want ?
What sort of volume do you want ? What sort of bass capability do you want ?
What sort of form factor do you want ? What is the thing actually for ?
For the last you cannot describe it by suggesting something is the answer.
rgds, sreten.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Class D
- Suitcase Stereo revisited--Please help DIY--My last resort.