I have a SSLV populated with premium parts, used with a buffalo 3 dac for a couple of months. Price 30 euro. I have a heatsink already attached and an R-core (2x0-12V@1A, 18-0-18V@0,7A). If you want these too, then price is 50 euro.
Also, I have made too many PSUs (CRC) for my f5 amp, that are gathering dust, so I will let go some of them. These are +/- PSU's. I have included snubber positions and testing points. The resistors of the CRC filter are solder on two separate boards (included) and these boards are snapped on the main board vertically. There are also position for terminal blocks to connect bleeders, and position for R+LED for indication. 2MM thickness.
SSLV sold
Luxurious PSU boards still available! 15 euro(1 main board+2 resistor board)
Also, I have made too many PSUs (CRC) for my f5 amp, that are gathering dust, so I will let go some of them. These are +/- PSU's. I have included snubber positions and testing points. The resistors of the CRC filter are solder on two separate boards (included) and these boards are snapped on the main board vertically. There are also position for terminal blocks to connect bleeders, and position for R+LED for indication. 2MM thickness.
SSLV sold
Luxurious PSU boards still available! 15 euro(1 main board+2 resistor board)
Attachments
Last edited:
ThanksAs to the SSLV, what's the output voltage?
Output is 5,25V.
Thanks for the replies.
One more question: Is the SSLV output voltage adjustable? if so, what's the range?
Regards
Nick
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.