Hi, i have a question for Speakerworkshop users.
I started calibrating the Wallin jig and get the correct sine wave inputs on left and right channels with a bit of latency.
The strange thing is that when i set the test signal for loop record and remove all cables from the soundcard i still get the same inputsignal on both channels.
This obviously means that there is no signal going through the jig,but where is the signal coming from?
There is no cd player connected to the soundcard.
any suggestions
kro5998
I started calibrating the Wallin jig and get the correct sine wave inputs on left and right channels with a bit of latency.
The strange thing is that when i set the test signal for loop record and remove all cables from the soundcard i still get the same inputsignal on both channels.
This obviously means that there is no signal going through the jig,but where is the signal coming from?
There is no cd player connected to the soundcard.
any suggestions
kro5998
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.