SOLD
Sealed 5.5 litre milliSize enclosure.
15mm Baltic Birch plywood. Quarter cut white oak, Port wine stain
173x297x179 mm (6 13/16 x 11 11/16 x 7") WxHxD
Some scratches, but the big (cosmetic) damage is from falling on a back corner.
The drivers in these sold in clearance at $125/matched pair. Flat-paks (no drivers) are $150.
I'm asking $125 for the enclosures with drivers.
Sealed 5.5 litre milliSize enclosure.
15mm Baltic Birch plywood. Quarter cut white oak, Port wine stain
173x297x179 mm (6 13/16 x 11 11/16 x 7") WxHxD
Some scratches, but the big (cosmetic) damage is from falling on a back corner.
The drivers in these sold in clearance at $125/matched pair. Flat-paks (no drivers) are $150.
I'm asking $125 for the enclosures with drivers.
Attachments
Classic Golden Ratio Mar-Ken12 with Alpair12eNS
SOLD
18mm Baltic Birch plywood. CGR MarKen12s are quarter cut white oak, Dark Walnut stain
276x446x185 mm (10 7/8 x 17 9/16 x 7 9/16") WxHxD
Some scratches, but pretty good. They have grills.
The drivers in these sell for $490/matched pair.
I'm asking $500 for the enclosures with drivers.
SOLD
18mm Baltic Birch plywood. CGR MarKen12s are quarter cut white oak, Dark Walnut stain
276x446x185 mm (10 7/8 x 17 9/16 x 7 9/16") WxHxD
Some scratches, but pretty good. They have grills.
The drivers in these sell for $490/matched pair.
I'm asking $500 for the enclosures with drivers.
Attachments
Last edited:
Mar-Ken12T with Alpair12eNC
SOLD
These represent the 1st of the trapezodal miniOnken enclosures -- actually 8-sided with the champhers and the trimmed sides.
18mm Baltic Birch plywood. Finished in cinnamon stained cherry.
281x419x257 mm (11 x 16 1/2 x 10 1/8") WxHxD
I won't guarantee they are scratch free, but they are very good. They have grills.
The drivers in these sell for $490/matched pair.
I'm asking $800 for the enclosures with drivers. Price drop to $650.
SOLD
These represent the 1st of the trapezodal miniOnken enclosures -- actually 8-sided with the champhers and the trimmed sides.
18mm Baltic Birch plywood. Finished in cinnamon stained cherry.
281x419x257 mm (11 x 16 1/2 x 10 1/8") WxHxD
I won't guarantee they are scratch free, but they are very good. They have grills.
The drivers in these sell for $490/matched pair.
I'm asking $800 for the enclosures with drivers. Price drop to $650.
Attachments
Last edited:
Alpair5eNC in short transmission lines
SOLD
Part of a FAST experiment.
PVC pipe. Wooden insert to mount driver in. Orange TL is friction fit and 1 has been sanded down as initial prep for finishing (clearcoat was planned)
112 Diameter x 311 mm (4 1/2 x 12 1/4)
I'm asking $50 for the enclosures with drivers. Price drop to $40
SOLD
Part of a FAST experiment.
PVC pipe. Wooden insert to mount driver in. Orange TL is friction fit and 1 has been sanded down as initial prep for finishing (clearcoat was planned)
112 Diameter x 311 mm (4 1/2 x 12 1/4)
I'm asking $50 for the enclosures with drivers. Price drop to $40
Attachments
mFonken103 w FE103eN
SOLD
15mm Baltic Birch plywood. Veneered in cherry. Natural with grey drivers.
173x297x179 mm (6 13/16 x 11 11/16 x 7") WxHxD
Minimal marks.
The drivers in these were only ever special order at $190/matched pair. Flat-paks (no drivers) are $150.
I'm asking $150 for the enclosures with drivers.
SOLD
15mm Baltic Birch plywood. Veneered in cherry. Natural with grey drivers.
173x297x179 mm (6 13/16 x 11 11/16 x 7") WxHxD
Minimal marks.
The drivers in these were only ever special order at $190/matched pair. Flat-paks (no drivers) are $150.
I'm asking $150 for the enclosures with drivers.
Attachments
Jordan JX92s in PE Maple curved 7 litre enclosures
SOLD
Tuned per Jim Griffin
In very good condition. Not sure if i can find the grills
PE Cabinet
JX92s
$300/pr
SOLD
Tuned per Jim Griffin
In very good condition. Not sure if i can find the grills
PE Cabinet
JX92s
$300/pr
Attachments
FonkenPrime w FE127eN with EnABLed cabinets
SOLD
18mm Baltic Birch plywood. Finished in natural maple. Bud Purvine himself EnBLed the cabinets.
228x354x303 mm (9 x 14 x 12") WxHxD
In very good condition.
I'm asking $600 for the enclosures with drivers. Price drop to $500
SOLD
18mm Baltic Birch plywood. Finished in natural maple. Bud Purvine himself EnBLed the cabinets.
228x354x303 mm (9 x 14 x 12") WxHxD
In very good condition.
I'm asking $600 for the enclosures with drivers. Price drop to $500
Attachments
Unfinished baltic birch Mar-Ken10 with Double Bevels
SOLD
18mm Baltic Birch plywood. Tops & bottoms are 3 layes of 18mm BB to accomodte the champhers. No finish, but has some of the Terry Olson Special Speaker Sauce (ie bondo) in prep for paint or veneer.
Fit your Alpair 10, of Alpair 10.2 (no bezel covers) and away you go.
258x440x272 mm (10 1/4 x 17 1/4 x 10 3/4") WxHxD
Driver cutout off-centre (and not mirror imaged, no worth us trying to fix or to finish. Our mistake, your benefit.
I'm asking $100 for the enclosures. Depending where you are, post could be as much as purchase price.
SOLD
18mm Baltic Birch plywood. Tops & bottoms are 3 layes of 18mm BB to accomodte the champhers. No finish, but has some of the Terry Olson Special Speaker Sauce (ie bondo) in prep for paint or veneer.
Fit your Alpair 10, of Alpair 10.2 (no bezel covers) and away you go.
258x440x272 mm (10 1/4 x 17 1/4 x 10 3/4") WxHxD
Driver cutout off-centre (and not mirror imaged, no worth us trying to fix or to finish. Our mistake, your benefit.
I'm asking $100 for the enclosures. Depending where you are, post could be as much as purchase price.
Attachments
mFonken with FE127eN
SOLD
15mm Baltic Birch plywood. Finished in natural cherry. Demos with a reasonable amount of break-in.
170x295x180 mm (6 3/4 x 11 1/2 x 71/4") WxHxD
In very good condition.
I'm asking $350 for the enclosures with drivers. Price drop to $315
SOLD
15mm Baltic Birch plywood. Finished in natural cherry. Demos with a reasonable amount of break-in.
170x295x180 mm (6 3/4 x 11 1/2 x 71/4") WxHxD
In very good condition.
I'm asking $350 for the enclosures with drivers. Price drop to $315
Attachments
Im building a low wattage tube (bottlehead) amp, how efficient are these speakers?
which speakers?
FWIW, I've used a pair of FE127E (in fact at one time or another, many of the actual enclosures pictured above) with a pair of Bottlehead Paramours, as well as clone of Decware 84C Zen and other 2-3W SE and class A PP triode amps. At these levels of sensitivity, the room and your listening habits play a large role in the system's overall effectiveness.
Lots of folks have been happy with combination of drivers with sensitivity as low as 88dB and amps in this weight class.
Im building a low wattage tube (bottlehead) amp, how efficient are these speakers?
You'd want to look at one of the 2 boxes with FE127eN. The larger FonkenPrime were one of Chris' main speakers for some time.
About 90 dB/1 watt
For more efficiency in a small driver, you get about an extra 3 dB by going to the FE126... of the boxes on sale, the prototype Madisound BK12M
dave
Are these still for Sale? Sorry folks for the question if I am late for the show. I am a newbie to the single-driver movement and am really liking it! If I had room in my home office, I would just splurge on a pair of Sachiko's.. but since I can't or have the room, these boxes look like they can more than do the job. I have several SET from 3.5wpc to 17wpc. The only thing I do worry about is low end extension.. but it looks like the volume is there to give me enough bass if I need it. Please let me know. Thanks.
18mm Baltic Birch plywood. Finished in natural maple. Bud Purvine himself EnBLed the cabinets.
228x354x303 mm (9 x 14 x 12") WxHxD
In very good condition.
I'm asking $600 for the enclosures with drivers. Price drop to $500
SOLD
Single Mark Audio Alpair12eN in Silver $60
Looks like the ones in the CGR MarKen12 pictured here http://www.diyaudio.com/forums/planet-10-hifi/200536-just-too-much-stuff-sold.html#post2757617
Single Mark Audio Alpair12eN in Silver $60
Looks like the ones in the CGR MarKen12 pictured here http://www.diyaudio.com/forums/planet-10-hifi/200536-just-too-much-stuff-sold.html#post2757617
SOLD
FF125wKeN. Natural w Maroon spots. The pair i sent east for demo. 20% off list = $176 pr. Note that shipping is from DC, so US buyers will get a break on that.
Edit (02-feb-13): Doug is giving away a set of boxes he built these for free... http://www.diyaudio.com/forums/plan...h-stuff-almost-giving-away-2.html#post3352763
FF125wKeN. Natural w Maroon spots. The pair i sent east for demo. 20% off list = $176 pr. Note that shipping is from DC, so US buyers will get a break on that.
Edit (02-feb-13): Doug is giving away a set of boxes he built these for free... http://www.diyaudio.com/forums/plan...h-stuff-almost-giving-away-2.html#post3352763
That's a great deal Dave.....
geshhh hard to give them up - but have a table full of speakers.
Two boxes up for sale (if interested):
Plywood boxes - unfinished (the uncoated drivers shown are not included)
Red boxes - MDF, flare ports.
geshhh hard to give them up - but have a table full of speakers.
Two boxes up for sale (if interested):
Plywood boxes - unfinished (the uncoated drivers shown are not included)
Red boxes - MDF, flare ports.
Attachments
A set of mMar-Kel70 (EL70eN) / $300/pr
SOLD
Listed earlier, now with pictures.
Cherry over 15mm Baltic Birch, Grills with magnetic attachment.
The front baffle has a mar... screwdriver slipped, good thing it went that way instead of towards the driver.
dave
SOLD
Listed earlier, now with pictures.
Cherry over 15mm Baltic Birch, Grills with magnetic attachment.
The front baffle has a mar... screwdriver slipped, good thing it went that way instead of towards the driver.
dave
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- Planet 10 hifi
- SOLD: JTMS (pictures of speakers we have built)