Selector Switches for car amplifier.

[Formas]

Hi guys, I need to restore an amp but the front panel selector switches normally for the crossover setting (Hi-Full-Low) is broken and the gain sensitivity selector also needs changing, can someone direct me to the part number or on digikey the type of switch that is needed?
As far as i know they are "DUAL" (left channel and right channel).
Im willing to give more specific info if needed, but i know someone here knows exactly what im asking about.

 

[Perry Babin]

This is generally something you have to measure with a dial/digital caliper and look up yourself.

 

[Formas]

I did almost exactly as you said Mr Babin, i didnt have a caliper but i have a millimeter stick (metal) and i used the multimeter to check the poles and throws (DP3T) and (DPDT)

EG2319 E-Switch | Switches | DigiKey

https://www.digikey.com/products/en?keywords=EG4367-ND

 

[Perry Babin]

You can get cheap digital calipers (good to 0.01", not 0.001") for about $4 if you're willing to wait on slow shipping from the far east. They're plastic but perfectly good for measuring parts in amps.