You can also
.... purchase resistive wire
with different thickness (current rating) and Ohm/meter coefficients.
You can buy these resistor wires rolled up on bobbins of a few sizes.
This way you will keep your power resistors intact.
Resistance wire material can be, for example:
Kanthal D --- Specific resistance: 1.3 Ω mm2 and 1 meter at +20 °C
Nikrothal 80 --- Specific resistance: 1.09 Ω mm2 and 1 meter at +20 °C
Resistance Wire, Info and buy:
http://www.elfa.se/elfa-bin/dyndok.pl?lang=en&vat=0&dok=2012513.htm
Website:
http://www.elfa.se/en/
lineup
.... purchase resistive wire
with different thickness (current rating) and Ohm/meter coefficients.
You can buy these resistor wires rolled up on bobbins of a few sizes.
This way you will keep your power resistors intact.
An externally hosted image should be here but it was not working when we last tested it.
Resistance wire material can be, for example:
Kanthal D --- Specific resistance: 1.3 Ω mm2 and 1 meter at +20 °C
Nikrothal 80 --- Specific resistance: 1.09 Ω mm2 and 1 meter at +20 °C
Resistance Wire, Info and buy:
http://www.elfa.se/elfa-bin/dyndok.pl?lang=en&vat=0&dok=2012513.htm
Website:
http://www.elfa.se/en/
lineup
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.