Hi,
I had a post on here not so long ago about making a guitar amp. I have a preamp schematic that runs off 15 volts and a power amp chip that works best off about 25V. Can i use the same transformer/power supply? If so how?
Really basic question i know...
Thanks in advance
Callum
I had a post on here not so long ago about making a guitar amp. I have a preamp schematic that runs off 15 volts and a power amp chip that works best off about 25V. Can i use the same transformer/power supply? If so how?
Really basic question i know...
Thanks in advance
Callum
Depending on yer preamp you might be able to run it off of 25v.
If it is an opamp preamp and runs off a single supply you can most likely run it off of 25v , most opamps can run off of 30v or more and you will get increased headroom useing a higher voltage supply.
Cheers
Maybe post a schematic of your preamp design.
If it is an opamp preamp and runs off a single supply you can most likely run it off of 25v , most opamps can run off of 30v or more and you will get increased headroom useing a higher voltage supply.
Cheers
Maybe post a schematic of your preamp design.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Live Sound
- Instruments and Amps
- same transformer, different voltages?